On 5/8/22 09:26, matthew.gerlach@xxxxxxxxxxxxxxx wrote:
From: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx> This patch set adds a device tree for the Hard Processor System (HPS) on an Agilex based Intel n6000 board. Patch 1 defines the device tree binding for the HPS Copy Engine IP used to copy a bootable image from host memory to HPS DDR. Patch 2 defines the binding for the Intel n6000 board itself. Patch 3 adds the device tree for the n6000 board. Changelog v3 -> v4: - move binding yaml from soc to soc/intel Changelog v2 -> v3: - remove unused label - move from misc to soc - remove 0x from #address-cells/#size-cells values - change hps_cp_eng@0 to dma-controller@0 - remote inaccurate 'items:' tag - added Acked-by - add unit number to memory node - remove spi node with unaccepted compatible value Changelog v1 -> v2: - add dt binding for copy enging - add dt binding for n6000 board - fix copy engine node name - fix compatible field for copy engine - remove redundant status field - add compatibility field for the board - fix SPDX - fix how osc1 clock frequency is set Matthew Gerlach (3): dt-bindings: soc: add bindings for Intel HPS Copy Engine dt-bindings: intel: add binding for Intel n6000 arm64: dts: intel: add device tree for n6000 .../bindings/arm/intel,socfpga.yaml | 1 + .../soc/intel/intel,hps-copy-engine.yaml | 51 ++++++++++++++ arch/arm64/boot/dts/intel/Makefile | 3 +- .../boot/dts/intel/socfpga_agilex_n6000.dts | 66 +++++++++++++++++++ 4 files changed, 120 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
Applied! Thanks, Dinh
