Hi, the Ethernet controller available in Amlogic Meson6 and Meson8 SoCs is a Synopsys DesignWare MAC IP core, already supported by the stmmac driver. These patches add a glue layer to the driver for the platform-specific settings required by the Amlogic variant. This has been tested on a Amlogic S802 device with the initial Meson support submitted by Carlo Caione [1]. [1] http://lwn.net/Articles/612000/ Beniamino Galvani (2): net: stmmac: add Amlogic Meson glue layer net: stmmac: meson: document device tree bindings .../devicetree/bindings/net/meson-dwmac.txt | 25 ++++++++ drivers/net/ethernet/stmicro/stmmac/Kconfig | 10 ++++ drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c | 67 ++++++++++++++++++++++ drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 + .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 + 6 files changed, 109 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/meson-dwmac.txt create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
