The bluetooth binding for the Quartz64 Model A has incorrectly named
host-wakeup and device-wakeup gpios. Rename them to clear some dtbs_check
warnings.
Signed-off-by: Peter Geis <pgwipeout@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index dd7f4b9b686b..ca0b92795d95 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -638,8 +638,8 @@ bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk817 1>;
clock-names = "lpo";
- device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
- host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
--
2.25.1
