Add transceiver, and pincontrol definitions for the CAN-FD interfaces
on the J721E Starter Kit (e.g. J1, J2, J5, J6 headers). Additionally,
MCAN interfaces that cannot be accessed are disabled.
Largely based on original work from Amarnath MB <amarnath.mb@xxxxxx>
Signed-off-by: Matt Ranostay <mranostay@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 160 +++++++++++++++++++++++++
1 file changed, 160 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 80358cba6954..8f1d4b51aa19 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -278,6 +278,42 @@ tfp410_out: endpoint {
};
};
};
+
+ transceiver1: can-phy0 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+ standby-gpios = <&wkup_gpio0 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver2: can-phy1 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan0_gpio_pins_default>;
+ standby-gpios = <&main_gpio0 65 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver3: can-phy2 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan5_gpio_pins_default>;
+ standby-gpios = <&main_gpio0 66 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver4: can-phy3 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan9_gpio_pins_default>;
+ standby-gpios = <&main_gpio0 67 GPIO_ACTIVE_HIGH>;
+ };
};
&main_pmx0 {
@@ -337,6 +373,45 @@ J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
>;
};
+ main_mcan0_pins_default: main-mcan0-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */
+ J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */
+ >;
+ };
+
+ main_mcan0_gpio_pins_default: main-mcan0-gpio-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x108, PIN_INPUT, 7) /* (AD27) PRG0_PRU1_GPO2.GPIO0_65 */
+ >;
+ };
+
+ main_mcan5_pins_default: main-mcan5-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x50, PIN_INPUT, 6) /* (AE21) PRG1_PRU0_GPO18.MCAN5_RX */
+ J721E_IOPAD(0x4c, PIN_OUTPUT, 6) /* (AJ21) PRG1_PRU0_GPO17.MCAN5_TX */
+ >;
+ };
+
+ main_mcan5_gpio_pins_default: main-mcan5-gpio-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x10c, PIN_INPUT, 7) /* (AC25) PRG0_PRU1_GPO3.GPIO0_66 */
+ >;
+ };
+
+ main_mcan9_pins_default: main-mcan9-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0xd0, PIN_INPUT, 6) /* (AC27) PRG0_PRU0_GPO8.MCAN9_RX */
+ J721E_IOPAD(0xcc, PIN_OUTPUT, 6) /* (AC28) PRG0_PRU0_GPO7.MCAN9_TX */
+ >;
+ };
+
+ main_mcan9_gpio_pins_default: main-mcan9-gpio-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x110, PIN_INPUT, 7) /* (AD29) PRG0_PRU1_GPO4.GPIO0_67 */
+ >;
+ };
+
dp0_pins_default: dp0-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
@@ -462,6 +537,19 @@ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
>;
};
+ mcu_mcan0_pins_default: mcu-mcan0-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0xac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */
+ J721E_WKUP_IOPAD(0xa8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */
+ >;
+ };
+
+ mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0xbc, PIN_INPUT, 7) /* (F27) WKUP_GPIO0_3 */
+ >;
+ };
+
/* Reset for M.2 M Key slot on PCIe1 */
mkey_reset_pins_default: mkey-reset-pns-pins-default {
pinctrl-single,pins = <
@@ -1129,3 +1217,75 @@ &c71_0 {
memory-region = <&c71_0_dma_memory_region>,
<&c71_0_memory_region>;
};
+
+&mcu_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan0_pins_default>;
+ phys = <&transceiver1>;
+};
+
+&mcu_mcan1 {
+ status = "disabled";
+};
+
+&main_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan0_pins_default>;
+ phys = <&transceiver2>;
+};
+
+&main_mcan1 {
+ status = "disabled";
+};
+
+&main_mcan2 {
+ status = "disabled";
+};
+
+&main_mcan3 {
+ status = "disabled";
+};
+
+&main_mcan4 {
+ status = "disabled";
+};
+
+&main_mcan5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan5_pins_default>;
+ phys = <&transceiver3>;
+};
+
+&main_mcan6 {
+ status = "disabled";
+};
+
+&main_mcan7 {
+ status = "disabled";
+};
+
+&main_mcan8 {
+ status = "disabled";
+};
+
+&main_mcan9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan9_pins_default>;
+ phys = <&transceiver4>;
+};
+
+&main_mcan10 {
+ status = "disabled";
+};
+
+&main_mcan11 {
+ status = "disabled";
+};
+
+&main_mcan12 {
+ status = "disabled";
+};
+
+&main_mcan13 {
+ status = "disabled";
+};
--
2.30.2
