This series adds support for the Marvell 98DX2530 SoC which is the Control and Management CPU integrated into the AlleyCat5/AlleyCat5X series of Marvell switches. The CPU core is an ARM Cortex-A55 with neon, simd and crypto extensions. This is fairly similar to the Armada-3700 SoC so most of the required peripherals are already supported. This series adds a devicetree and pinctrl driver for the SoC and the RD-AC5X-32G16HVG6HLG reference board. The pinctrl changes from v4 have been picked up and are in linux-next so I haven't included them in this round. That leaves just the dts files and a minor Kconfig update for arm64. Chris Packham (3): dt-bindings: marvell: Document the AC5/AC5X compatibles arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board arm64: marvell: enable the 98DX2530 pinctrl driver .../bindings/arm/marvell/armada-98dx2530.yaml | 27 ++ arch/arm64/Kconfig.platforms | 2 + arch/arm64/boot/dts/marvell/Makefile | 1 + .../boot/dts/marvell/armada-98dx2530.dtsi | 313 ++++++++++++++++++ arch/arm64/boot/dts/marvell/rd-ac5x.dts | 90 +++++ 5 files changed, 433 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/marvell/armada-98dx2530.yaml create mode 100644 arch/arm64/boot/dts/marvell/armada-98dx2530.dtsi create mode 100644 arch/arm64/boot/dts/marvell/rd-ac5x.dts -- 2.36.0
