Add documentation for device-tree binding of arm PXA 27x udc (usb
device) driver.
Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
Since V1: change OF id mrvl,pxa27x_udc -> marvell,pxa27x-udc
This is a consequence of other DT reviews on the marvell
namings.
Since V2: Mark's review
- described standard properties
- use standard gpio bindings for pullup gpio
Since V3: Arnd's review
- removed clock-names
---
Documentation/devicetree/bindings/usb/pxa-usb.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/pxa-usb.txt b/Documentation/devicetree/bindings/usb/pxa-usb.txt
index 79729a9..9c33179 100644
--- a/Documentation/devicetree/bindings/usb/pxa-usb.txt
+++ b/Documentation/devicetree/bindings/usb/pxa-usb.txt
@@ -29,3 +29,25 @@ Example:
marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
};
+UDC
+
+Required properties:
+ - compatible: Should be "marvell,pxa270-udc" for USB controllers
+ used in device mode.
+ - reg: usb device MMIO address space
+ - interrupts: single interrupt generated by the UDC IP
+ - clocks: input clock of the UDC IP (see clock-bindings.txt)
+
+Optional properties:
+ - gpios:
+ - gpio activated to control the USB D+ pullup (see gpio.txt)
+
+Example:
+
+ pxa27x_udc: udc@40600000 {
+ compatible = "marvell,pxa270-udc";
+ reg = <0x40600000 0x10000>;
+ interrupts = <11>;
+ clocks = <&pxa2xx_clks 11>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
--
2.0.0.rc2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
