On Mon, 9 May 2022 07:48:53 +0000
Corentin Labbe <clabbe@xxxxxxxxxxxx> wrote:
Hi,
> Now regulator is handled by phy core, there is no need to handle it in
> stmmac driver.
I don't think you can do that, since we definitely need to maintain
compatibility with *older* DTs.
Is there a real need for this patch, or is it just a cleanup?
I mean we should be able to keep both approaches in, and the respective
board and DT version selects which it is using.
Cheers,
Andre
> Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
> ---
> .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 37 +------------------
> 1 file changed, 2 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> index f834472599f7..17888813c707 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> @@ -17,7 +17,6 @@
> #include <linux/phy.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> -#include <linux/regulator/consumer.h>
> #include <linux/regmap.h>
> #include <linux/stmmac.h>
>
> @@ -59,7 +58,6 @@ struct emac_variant {
>
> /* struct sunxi_priv_data - hold all sunxi private data
> * @ephy_clk: reference to the optional EPHY clock for the internal PHY
> - * @regulator: reference to the optional regulator
> * @rst_ephy: reference to the optional EPHY reset for the internal PHY
> * @variant: reference to the current board variant
> * @regmap: regmap for using the syscon
> @@ -69,7 +67,6 @@ struct emac_variant {
> */
> struct sunxi_priv_data {
> struct clk *ephy_clk;
> - struct regulator *regulator;
> struct reset_control *rst_ephy;
> const struct emac_variant *variant;
> struct regmap_field *regmap_field;
> @@ -568,29 +565,11 @@ static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
> {
> struct net_device *ndev = platform_get_drvdata(pdev);
> struct sunxi_priv_data *gmac = priv;
> - int ret;
>
> - if (gmac->regulator) {
> - ret = regulator_enable(gmac->regulator);
> - if (ret) {
> - dev_err(&pdev->dev, "Fail to enable regulator\n");
> - return ret;
> - }
> - }
> -
> - if (gmac->use_internal_phy) {
> - ret = sun8i_dwmac_power_internal_phy(netdev_priv(ndev));
> - if (ret)
> - goto err_disable_regulator;
> - }
> + if (gmac->use_internal_phy)
> + return sun8i_dwmac_power_internal_phy(netdev_priv(ndev));
>
> return 0;
> -
> -err_disable_regulator:
> - if (gmac->regulator)
> - regulator_disable(gmac->regulator);
> -
> - return ret;
> }
>
> static void sun8i_dwmac_core_init(struct mac_device_info *hw,
> @@ -1034,9 +1013,6 @@ static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
>
> if (gmac->variant->soc_has_internal_phy)
> sun8i_dwmac_unpower_internal_phy(gmac);
> -
> - if (gmac->regulator)
> - regulator_disable(gmac->regulator);
> }
>
> static void sun8i_dwmac_set_mac_loopback(void __iomem *ioaddr, bool enable)
> @@ -1157,15 +1133,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
> return -EINVAL;
> }
>
> - /* Optional regulator for PHY */
> - gmac->regulator = devm_regulator_get_optional(dev, "phy");
> - if (IS_ERR(gmac->regulator)) {
> - if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER)
> - return -EPROBE_DEFER;
> - dev_info(dev, "No regulator found\n");
> - gmac->regulator = NULL;
> - }
> -
> /* The "GMAC clock control" register might be located in the
> * CCU address range (on the R40), or the system control address
> * range (on most other sun8i and later SoCs).
