On 07/05/2022 22:29, Robert Marko wrote: > GCC inside of IPQ8074 also provides power management via built-in GDSCs. > In order to do so, '#power-domain-cells' must be set to 1. > > Signed-off-by: Robert Marko <robimarko@xxxxxxxxx> > --- > .../devicetree/bindings/clock/qcom,gcc-ipq8074.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml > index 98572b4a9b60..e3e236e4ce7d 100644 > --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml > @@ -27,6 +27,9 @@ properties: > '#reset-cells': > const: 1 > > + '#power-domain-cells': Put it in some order, e.g. before reset-cells. > + const: 1 > + > reg: > maxItems: 1 > > @@ -39,6 +42,7 @@ required: > - reg > - '#clock-cells' > - '#reset-cells' > + - '#power-domain-cells' The same. > > additionalProperties: false > > @@ -49,5 +53,6 @@ examples: > reg = <0x01800000 0x80000>; > #clock-cells = <1>; > #reset-cells = <1>; > + #power-domain-cells = <1>; The same. > }; > ... Best regards, Krzysztof
