Naveen Krishna Chatradhi wrote: > > Add initial device tree nodes for EXYNOS7 SoC and board dts file > to support Espresso board based on Exynos7 SoC. > > Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx> > Cc: Rob Herring <robh@xxxxxxxxxx> > Cc: Catalin Marinas <catalin.marinas@xxxxxxx> Looks good to me, Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx> Thanks, Kukjin > --- > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/exynos/Makefile | 5 + > arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 39 ++++++ > arch/arm64/boot/dts/exynos/exynos7.dtsi | 160 +++++++++++++++++++++++ > 4 files changed, 205 insertions(+) > create mode 100644 arch/arm64/boot/dts/exynos/Makefile > create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts > create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi > > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile > index 309c3dc..b13bf21 100644 > --- a/arch/arm64/boot/dts/Makefile > +++ b/arch/arm64/boot/dts/Makefile > @@ -1,5 +1,6 @@ > dts-dirs += apm > dts-dirs += arm > +dts-dirs += exynos > > always := $(dtb-y) > subdir-y := $(dts-dirs) > diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile > new file mode 100644 > index 0000000..20310e5 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/Makefile > @@ -0,0 +1,5 @@ > +dtb-$(CONFIG_ARCH_EXYNOS7) += exynos7-espresso.dtb > + > +always := $(dtb-y) > +subdir-y := $(dts-dirs) > +clean-files := *.dtb > diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7- > espresso.dts > new file mode 100644 > index 0000000..e2c8283 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts > @@ -0,0 +1,39 @@ > +/* > + * SAMSUNG Exynos7 Espresso board device tree source > + * > + * Copyright (c) 2014 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +/dts-v1/; > +#include "exynos7.dtsi" > + > +/ { > + model = "Samsung Exynos7 Espresso board based on EXYNOS7"; > + compatible = "samsung,exynos7-espresso", "samsung,exynos7"; > + > + aliases { > + serial0 = &serial_2; > + }; > + > + chosen { > + linux,stdout-path = &serial_2; > + }; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x0 0x40000000 0x0 0xC0000000>; > + }; > +}; > + > +&fin_pll { > + clock-frequency = <24000000>; > +}; > + > +&serial_2 { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi > new file mode 100644 > index 0000000..c5b1b86 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi > @@ -0,0 +1,160 @@ > +/* > + * SAMSUNG EXYNOS7 SoC device tree source > + * > + * Copyright (c) 2014 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <dt-bindings/clock/exynos7-clk.h> > + > +/ { > + compatible = "samsung,exynos7"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0>; > + }; > + > + cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x1>; > + }; > + > + cpu@2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x2>; > + }; > + > + cpu@3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x3>; > + }; > + }; > + > + psci { > + compatible = "arm,psci-0.2"; > + method = "smc"; > + }; > + > + soc: soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0 0 0x18000000>; > + > + chipid@10000000 { > + compatible = "samsung,exynos4210-chipid"; > + reg = <0x10000000 0x100>; > + }; > + > + fin_pll: xxti { > + compatible = "fixed-clock"; > + clock-output-names = "fin_pll"; > + #clock-cells = <0>; > + }; > + > + gic: interrupt-controller@11001000 { > + compatible = "arm,gic-400"; > + #interrupt-cells = <3>; > + #address-cells = <0>; > + interrupt-controller; > + reg = <0x11001000 0x1000>, > + <0x11002000 0x1000>, > + <0x11004000 0x2000>, > + <0x11006000 0x2000>; > + }; > + > + clock_topc: clock-controller@10570000 { > + compatible = "samsung,exynos7-clock-topc"; > + reg = <0x10570000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_top0: clock-controller@105d0000 { > + compatible = "samsung,exynos7-clock-top0"; > + reg = <0x105d0000 0xb000>; > + #clock-cells = <1>; > + }; > + > + clock_peric0: clock-controller@13610000 { > + compatible = "samsung,exynos7-clock-peric0"; > + reg = <0x13610000 0xd00>; > + #clock-cells = <1>; > + }; > + > + clock_peric1: clock-controller@14C80000 { > + compatible = "samsung,exynos7-clock-peric1"; > + reg = <0x14c80000 0xd00>; > + #clock-cells = <1>; > + }; > + > + clock_peris: clock-controller@10040000 { > + compatible = "samsung,exynos7-clock-peris"; > + reg = <0x10040000 0xd00>; > + #clock-cells = <1>; > + }; > + > + serial_0: serial@13630000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x13630000 0x100>; > + interrupts = <0 440 0>; > + clocks = <&clock_peric0 PCLK_UART0>, <&clock_peric0 SCLK_UART0>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "disabled"; > + }; > + > + serial_1: serial@14c20000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x14c20000 0x100>; > + interrupts = <0 456 0>; > + clocks = <&clock_peric1 PCLK_UART1>, <&clock_peric1 SCLK_UART1>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "disabled"; > + }; > + > + serial_2: serial@14c30000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x14c30000 0x100>; > + interrupts = <0 457 0>; > + clocks = <&clock_peric1 PCLK_UART2>, <&clock_peric1 SCLK_UART2>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "disabled"; > + }; > + > + serial_3: serial@14c40000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x14c40000 0x100>; > + interrupts = <0 458 0>; > + clocks = <&clock_peric1 PCLK_UART3>, <&clock_peric1 SCLK_UART3>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "disabled"; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <1 13 0xff01>, > + <1 14 0xff01>, > + <1 11 0xff01>, > + <1 10 0xff01>; > + }; > + }; > +}; > -- > 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
