The PM8916 and PMS405 PMIC GPIOs are interrupt controllers, as described in the bindings and used by the driver. Drop the interrupts (apparently copied from downstream tree), just like in commit 61d2ca503d0b ("arm64: dts: qcom: fix pm8150 gpio interrupts"): qcs404-evb-4000.dtb: gpio@c000: 'interrupts' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+' qcs404-evb-4000.dtb: gpio@c000: 'interrupt-controller' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/pm8916.dtsi | 6 ++---- arch/arm64/boot/dts/qcom/pms405.dtsi | 14 ++------------ 2 files changed, 4 insertions(+), 16 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index d52919a8c0b0..0b6e8ad7fa50 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -113,10 +113,8 @@ pm8916_gpios: gpios@c000 { gpio-controller; gpio-ranges = <&pm8916_gpios 0 0 4>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 26f1e8cc9c6c..634b0681d04c 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -43,18 +43,8 @@ pms405_gpios: gpio@c000 { gpio-controller; gpio-ranges = <&pms405_gpios 0 0 12>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; pon@800 { -- 2.32.0