On 8.05.2022 00:46, Marijn Suijten wrote:
> It seems the SM6350_CX definition was temporarily replaced with its
> literal value 0 in 1797e1c9a95c ("arm64: dts: qcom: sm6350: Add SDHCI1/2
> nodes") to prevent a dependency on the qcom-rpmpd.h header patch being
> available prior to this DT patch being applied, similar to c23f1b77358c
> ("arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX").
> However, unlike the revert of that in the sm6125 tree the next merge
> window around in a90b8adfa2dd ("Revert "arm64: dts: qcom: sm6125: Avoid
> using missing SM6125_VDDCX""), this has not yet happened for sm6350:
> replace them back now that the definitions are definitely available.
>
> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sm6350.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> index fb1a0f662575..b3160720edcb 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -489,7 +489,7 @@ sdhc_1: sdhci@7c4000 {
> clock-names = "iface", "core", "xo";
> qcom,dll-config = <0x000f642c>;
> qcom,ddr-config = <0x80040868>;
> - power-domains = <&rpmhpd 0>;
> + power-domains = <&rpmhpd SM6350_CX>;
> operating-points-v2 = <&sdhc1_opp_table>;
> bus-width = <8>;
> non-removable;
> @@ -935,7 +935,7 @@ sdhc_2: sdhci@8804000 {
> clock-names = "iface", "core", "xo";
> qcom,dll-config = <0x0007642c>;
> qcom,ddr-config = <0x80040868>;
> - power-domains = <&rpmhpd 0>;
> + power-domains = <&rpmhpd SM6350_CX>;
> operating-points-v2 = <&sdhc2_opp_table>;
> bus-width = <4>;
>
