The bindings require that every pin configuration comes with 'function'
property. There is also no 'drive-strength' property but
'qcom,drive-strength':
msm8994-msft-lumia-octagon-cityman.dtb: gpios@c000: amsel-high-state: 'oneOf' conditional failed, one must be fixed:
'drive-strength' does not match any of the regexes: 'pinctrl-[0-9]+'
'bias-pull-up', 'drive-strength', 'function', 'pins' do not match any of the regexes: '(pinconf|-pins)$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Not tested on hardware.
---
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index 9161b9e1bda1..abe746e88ce1 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -521,19 +521,22 @@ &pmi8994_gpios {
*/
hd3ss460_pol: pol-low-state {
pins = "gpio8";
- drive-strength = <3>;
+ function = PMIC_GPIO_FUNC_NORMAL;
+ qcom,drive-strength = <3>;
bias-pull-down;
};
hd3ss460_amsel: amsel-high-state {
pins = "gpio9";
- drive-strength = <1>;
+ function = PMIC_GPIO_FUNC_NORMAL;
+ qcom,drive-strength = <1>;
bias-pull-up;
};
hd3ss460_en: en-high-state {
pins = "gpio10";
- drive-strength = <1>;
+ function = PMIC_GPIO_FUNC_NORMAL;
+ qcom,drive-strength = <1>;
bias-pull-up;
};
};
--
2.32.0
