Enable the DT nodes for HDMI TX and PHY and add the pinctrl for the few
involved pins that are configurable.
Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 4c3ac4214a2c..fdf851865ba9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -197,6 +197,16 @@ ethphy1: ethernet-phy@1 {
};
};
+&hdmi_tx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ status = "okay";
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -465,6 +475,15 @@ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19
>;
};
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c3
+ MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c3
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x19
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
--
2.30.2
