[PATCH v1 19/24] ARM: dts: imx7-colibri: clean-up device enabling/disabling

[Marcel Ziswiler <marcel@xxxxxxxxxxxx>]

From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>

Disable most nodes on module-level to be enabled on carrier board-level.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
---

 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 1 -
 arch/arm/boot/dts/imx7-colibri.dtsi         | 5 -----
 2 files changed, 6 deletions(-)

diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index fea6e4c0d4d6..826f13da5b81 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -44,7 +44,6 @@ mcp2515: can@0 {
 		spi-max-frequency = <10000000>;
 		vdd-supply = <&reg_3v3>;
 		xceiver-supply = <&reg_5v0>;
-		status = "okay";
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index f29096fca54d..065d8f55f326 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -140,9 +140,6 @@ &adc1 {
 };
 
 /* ADC2 is not available as it conflicts with AD7879 resistive touchscreen. */
-&adc2 {
-	status = "disabled";
-};
 
 &cpu0 {
 	cpu-supply = <&reg_DCDC2>;
@@ -191,13 +188,11 @@ ethphy0: ethernet-phy@0 {
 &flexcan1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
 };
 
 &flexcan2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
 };
 
 &gpio1 {
-- 
2.35.1