From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> Add the MDIO bus with the respective PHY to allow for making changes to that easier. While at it also alphabetically re-order properties and improve indentation. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> --- arch/arm/boot/dts/imx7-colibri.dtsi | 35 ++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index e20b0977f38f..074ebb0f8001 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -83,21 +83,34 @@ &ecspi3 { }; &fec1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pinctrl_enet1>; - pinctrl-1 = <&pinctrl_enet1_sleep>; - clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>; - clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; - assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>; + fsl,magic-packet; + phy-handle = <ðphy0>; phy-mode = "rmii"; phy-supply = <®_LDO1>; - fsl,magic-packet; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_enet1>; + pinctrl-1 = <&pinctrl_enet1_sleep>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + micrel,led-mode = <0>; + reg = <0>; + }; + }; }; &flexcan1 { -- 2.35.1