This describes a power connector supplied by a regulator, such as a power outlet on a power distribution unit (PDU). Signed-off-by: Zev Weiss <zev@xxxxxxxxxxxxxxxxx> --- .../connector/regulator-connector.yaml | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/connector/regulator-connector.yaml diff --git a/Documentation/devicetree/bindings/connector/regulator-connector.yaml b/Documentation/devicetree/bindings/connector/regulator-connector.yaml new file mode 100644 index 000000000000..96825b6f608a --- /dev/null +++ b/Documentation/devicetree/bindings/connector/regulator-connector.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/connector/regulator-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator output connector + +maintainers: + - Zev Weiss <zev@xxxxxxxxxxxxxxxxx> + +description: | + This describes a power connector supplied by a regulator, such as a + power outlet on a power distribution unit (PDU). The connector may + be standalone or merely one channel or set of pins within a ganged + physical connector carrying multiple independent power outputs. + +properties: + compatible: + const: regulator-connector + + vout-supply: + description: + Phandle of the regulator supplying the connector. + +required: + - compatible + - vout-supply + +additionalProperties: false + +examples: + - | + output { + compatible = "regulator-connector"; + vout-supply = <&output_reg>; + }; -- 2.36.0
