Use dev_err_probe instead of dev_err to avoid duplicate error
messages if the GPIO allocation makes the probe defer.
Signed-off-by: Markuss Broks <markuss.broks@xxxxxxxxx>
---
drivers/leds/flash/leds-ktd2692.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/leds/flash/leds-ktd2692.c b/drivers/leds/flash/leds-ktd2692.c
index ed1f20a58bf6..8b99742cb68a 100644
--- a/drivers/leds/flash/leds-ktd2692.c
+++ b/drivers/leds/flash/leds-ktd2692.c
@@ -279,17 +279,13 @@ static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,
led->ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_ASIS);
ret = PTR_ERR_OR_ZERO(led->ctrl_gpio);
- if (ret) {
- dev_err(dev, "cannot get ctrl-gpios %d\n", ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "cannot get ctrl-gpios\n");
led->aux_gpio = devm_gpiod_get(dev, "aux", GPIOD_ASIS);
ret = PTR_ERR_OR_ZERO(led->aux_gpio);
- if (ret) {
- dev_err(dev, "cannot get aux-gpios %d\n", ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, PTR_ERR(led->aux_gpio), "cannot get aux-gpios\n");
led->regulator = devm_regulator_get(dev, "vin");
if (IS_ERR(led->regulator))
--
2.35.1
