On Wed, May 04, 2022 at 12:15:48PM -0500, Rob Herring wrote:
> On Tue, May 03, 2022 at 05:16:33PM +0200, Ansuel Smith wrote:
> > Add LEDs definition example for qca8k using the offload trigger as the
> > default trigger and add all the supported offload triggers by the
> > switch.
> >
> > Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> > ---
> > .../devicetree/bindings/net/dsa/qca8k.yaml | 20 +++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > index f3c88371d76c..9b46ef645a2d 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > @@ -65,6 +65,8 @@ properties:
> > internal mdio access is used.
> > With the legacy mapping the reg corresponding to the internal
> > mdio is the switch reg with an offset of -1.
> > + Each phy have at least 3 LEDs connected and can be declared
>
> s/at least/up to/ ?
>
> Or your example is wrong with only 2.
>
Up to. Internally the regs are there but 99% of the times OEM just
connect 2 of 3 LEDs. Will fix.
> > + using the standard LEDs structure.
> >
> > patternProperties:
> > "^(ethernet-)?ports$":
> > @@ -287,6 +289,24 @@ examples:
> >
> > internal_phy_port1: ethernet-phy@0 {
> > reg = <0>;
> > +
> > + leds {
> > + led@0 {
> > + reg = <0>;
> > + color = <LED_COLOR_ID_WHITE>;
> > + function = LED_FUNCTION_LAN;
> > + function-enumerator = <1>;
> > + linux,default-trigger = "netdev";
> > + };
> > +
> > + led@1 {
> > + reg = <1>;
> > + color = <LED_COLOR_ID_AMBER>;
> > + function = LED_FUNCTION_LAN;
> > + function-enumerator = <1>;
> > + linux,default-trigger = "netdev";
> > + };
> > + };
> > };
> >
> > internal_phy_port2: ethernet-phy@1 {
> > --
> > 2.34.1
> >
> >
--
Ansuel
