Re: [PATCH net-next v3 04/12] net: pcs: add Renesas MII converter driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le Thu, 5 May 2022 09:16:38 +0200,
Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> a écrit :

> Hi Clément,
> 
> On Wed, May 4, 2022 at 11:31 AM Clément Léger <clement.leger@xxxxxxxxxxx> wrote:
> > Add a PCS driver for the MII converter that is present on the Renesas
> > RZ/N1 SoC. This MII converter is reponsible for converting MII to
> > RMII/RGMII or act as a MII pass-trough. Exposing it as a PCS allows to
> > reuse it in both the switch driver and the stmmac driver. Currently,
> > this driver only allows the PCS to be used by the dual Cortex-A7
> > subsystem since the register locking system is not used.
> >
> > Signed-off-by: Clément Léger <clement.leger@xxxxxxxxxxx>  
> 
> Thanks for your patch!
> 
> > --- /dev/null
> > +++ b/drivers/net/pcs/pcs-rzn1-miic.c  
> 
> > +static int miic_probe(struct platform_device *pdev)
> > +{
> > +       struct device *dev = &pdev->dev;
> > +       struct miic *miic;
> > +       u32 mode_cfg;
> > +       int ret;
> > +
> > +       ret = miic_parse_dt(dev, &mode_cfg);
> > +       if (ret < 0)
> > +               return -EINVAL;
> > +
> > +       miic = devm_kzalloc(dev, sizeof(*miic), GFP_KERNEL);
> > +       if (!miic)
> > +               return -ENOMEM;
> > +
> > +       spin_lock_init(&miic->lock);
> > +       miic->dev = dev;
> > +       miic->base = devm_platform_ioremap_resource(pdev, 0);
> > +       if (!miic->base)
> > +               return -EINVAL;
> > +
> > +       pm_runtime_enable(dev);
> > +       ret = pm_runtime_resume_and_get(dev);
> > +       if (ret < 0)  
> 
> Missing pm_runtime_disable(dev).

Maybe using devm_pm_runtime_enable() would be sufficient and avoid such
calls.

> 
> > +               return ret;
> > +
> > +       ret = miic_init_hw(miic, mode_cfg);
> > +       if (ret)
> > +               goto disable_runtime_pm;
> > +
> > +       /* miic_create() relies on that fact that data are attached to the
> > +        * platform device to determine if the driver is ready so this needs to
> > +        * be the last thing to be done after everything is initialized
> > +        * properly.
> > +        */
> > +       platform_set_drvdata(pdev, miic);
> > +
> > +       return 0;
> > +
> > +disable_runtime_pm:
> > +       pm_runtime_put(dev);  
> 
> Missing pm_runtime_disable(dev).
> 
> > +
> > +       return ret;
> > +}
> > +
> > +static int miic_remove(struct platform_device *pdev)
> > +{
> > +       pm_runtime_put(&pdev->dev);  
> 
> Missing pm_runtime_disable(dev).
> 
> > +
> > +       return 0;
> > +}  
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds



-- 
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux