Hi,
> Gesendet: Freitag, 22. April 2022 um 09:28 Uhr
> Von: "Sascha Hauer" <s.hauer@xxxxxxxxxxxxxx>
> Betreff: [PATCH v11 17/24] arm64: dts: rockchip: rk356x: Add HDMI nodes
>
> Add support for the HDMI port found on RK3568.
>
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> ---
>
> Notes:
> Changes since v7:
> - Rename hclk to niu
clock-name no more present since v9, see below
> Changes since v5:
> - Drop unnecessary #size-cells/#address-cells from nodes with only single endpoint
>
...
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -620,6 +620,38 @@ vop_mmu: iommu@fe043e00 {
> status = "disabled";
> };
>
> + hdmi: hdmi@fe0a0000 {
> + compatible = "rockchip,rk3568-dw-hdmi";
> + reg = <0x0 0xfe0a0000 0x0 0x20000>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru PCLK_HDMI_HOST>,
> + <&cru CLK_HDMI_SFR>,
> + <&cru CLK_HDMI_CEC>,
> + <&pmucru CLK_HDMI_REF>,
> + <&cru HCLK_VO>;
> + clock-names = "iahb", "isfr", "cec", "ref";
noticed there are still 5 clocks, but only 4 clock-names. So i added "niu" after ref.
maybe missing clock-name was causing my iommu page-faults...on a quick test i have not got it,
but they came not every time.
what do you think?
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> + power-domains = <&power RK3568_PD_VO>;
regards Frank
