The A23 SoC has the same dma engine as the A31 (sun6i), with a
reduced amount of endpoints and physical channels. Add the proper
config data and compatible string to support it.
A slight difference in sun8i is an undocumented register needs
to be toggled for dma to function.
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
.../devicetree/bindings/dma/sun6i-dma.txt | 2 +-
drivers/dma/Kconfig | 4 ++--
drivers/dma/sun6i-dma.c | 27 ++++++++++++++++++++++
3 files changed, 30 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
index 3e145c1..9cdcba24d 100644
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -4,7 +4,7 @@ This driver follows the generic DMA bindings defined in dma.txt.
Required properties:
-- compatible: Must be "allwinner,sun6i-a31-dma"
+- compatible: Must be "allwinner,sun6i-a31-dma" or "allwinner,sun8i-a23-dma"
- reg: Should contain the registers base address and length
- interrupts: Should contain a reference to the interrupt used by this device
- clocks: Should contain a reference to the parent AHB clock
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 9b1ea0e..5361aa7 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -395,12 +395,12 @@ config XILINX_VDMA
config DMA_SUN6I
tristate "Allwinner A31 SoCs DMA support"
- depends on MACH_SUN6I || COMPILE_TEST
+ depends on MACH_SUN6I || MACH_SUN8I || COMPILE_TEST
depends on RESET_CONTROLLER
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
- Support for the DMA engine for Allwinner A31 SoCs.
+ Support for the DMA engine first found in Allwinner A31 SoCs.
config NBPFAXI_DMA
tristate "Renesas Type-AXI NBPF DMA support"
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 89ca0c4..cb9aa43 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -43,6 +43,12 @@
#define DMA_STAT 0x30
/*
+ * sun8i specific registers
+ */
+#define SUN8I_DMA_GATE 0x20
+#define SUN8I_DMA_GATE_ENABLE 0x4
+
+/*
* Channels specific registers
*/
#define DMA_CHAN_ENABLE 0x00
@@ -878,8 +884,20 @@ static struct sun6i_dma_config sun6i_a31_dma_cfg = {
.nr_max_vchans = 53,
};
+/*
+ * The A23 only has 8 physical channels, a maximum DRQ port id of 24,
+ * and a total of 37 usable source and destination endpoints.
+ */
+
+static struct sun6i_dma_config sun8i_a23_dma_cfg = {
+ .nr_max_channels = 8,
+ .nr_max_requests = 24,
+ .nr_max_vchans = 37,
+};
+
static struct of_device_id sun6i_dma_match[] = {
{ .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg },
+ { .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg },
{ /* sentinel */ }
};
@@ -1008,6 +1026,15 @@ static int sun6i_dma_probe(struct platform_device *pdev)
goto err_dma_unregister;
}
+ /*
+ * sun8i variant requires us to toggle a dma gating register,
+ * as seen in Allwinner's SDK. This register is not documented
+ * in the A23 user manual.
+ */
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "allwinner,sun8i-a23-dma"))
+ writel(SUN8I_DMA_GATE_ENABLE, sdc->base + SUN8I_DMA_GATE);
+
return 0;
err_dma_unregister:
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
