On Wed, 23 Feb 2022 at 13:57, Shawn Guo <shawn.guo@xxxxxxxxxx> wrote: > > It starts from updating cpu_pm to support CPU_LAST_PM_ENTER (and > CPU_FIRST_PM_EXIT) event, and then adds DT binding and driver support > for Qualcomm MPM (MSM Power Manager) interrupt controller. > > Changes for v6: > - Add new event CPU_LAST_PM_ENTER (and CPU_FIRST_PM_EXIT) in cpu_pm > - Drop vendor driver notes from commit log > - Check NULL mpm_gic_map instead to save the use of MPM_NO_PARENT_IRQ > - Add lock protection for register read in qcom_mpm_handler() > - Return IRQ_NONE if there is no pending interrupt > - Drop IRQF_TRIGGER_RISING flag from devm_request_irq() call since it's > being specified in DT > - Drop dev_set_drvdata() call which is a leftover from previous version > - Fix dt_binding_check errors reported by upgraded dtschema My apologies for the late reply to this series. FYI, I fully agree with the responses from Sudeep, etc, that have been made on this series. The proper thing is to use genpd on/off notifiers, which should get fired if you model the PM domain topology correctly in DT - and use PSCI OSI. That said, please keep me posted when/if you submit a new version for this. I will make sure to pay more attention next time. Kind regards Uffe > > Changes for v5: > - Drop inline attributes and let compiler to decide > - Use _irqsave/_irqrestore flavour for spin lock > - Assignment on a single for irq_resolve_mapping() call > - Add documentation to explain vMPM ownership transition > - Move MPM pin map data into device tree and so use a generic compatible > - Drop the code that counts CPUs in PM and use CPU_CLUSTER_PM_ENTER > notification instead > > Changes for v4: > - Add the missing include of <linux/interrupt.h> to fix build errors > on arm architecture. > - Leave IRQCHIP_PLATFORM_DRIVER infrastructural unchanged, and use > of_find_device_by_node() to get platform_device pointer. > > Changes for v3: > - Support module build > - Use relaxed accessors > - Add barrier call to ensure MMIO write completes > - Use d->chip_data to pass driver private data > - Use raw spinlock > - USe BIT() for bit shift > - Create a single irq domain to cover both types of MPM pins > - Call irq_resolve_mapping() to find out Linux irq number > - Save the use of ternary conditional operator and use switch/case for > .irq_set_type call > - Drop unnecessary .irq_disable hook > - Align qcom_mpm_chip and qcom_mpm_ops members vertically > - Use helper irq_domain_translate_twocell() > - Move mailbox requesting forward in probe function > - Improve the documentation on qcm2290_gic_pins[] > - Use IRQCHIP_PLATFORM_DRIVER infrastructural > - Use cpu_pm notifier instead of .suspend_late hook to write MPM for > sleep, so that MPM can be set up for both suspend and idle context. > The TIMER0/1 setup is currently omitted for idle use case though, > as I haven't been able to successfully test the idle context. > > Shawn Guo (3): > PM: cpu: Add CPU_LAST_PM_ENTER and CPU_FIRST_PM_EXIT support > dt-bindings: interrupt-controller: Add Qualcomm MPM support > irqchip: Add Qualcomm MPM controller driver > > .../interrupt-controller/qcom,mpm.yaml | 96 ++++ > drivers/irqchip/Kconfig | 8 + > drivers/irqchip/Makefile | 1 + > drivers/irqchip/qcom-mpm.c | 439 ++++++++++++++++++ > include/linux/cpu_pm.h | 15 + > kernel/cpu_pm.c | 33 +- > 6 files changed, 590 insertions(+), 2 deletions(-) > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml > create mode 100644 drivers/irqchip/qcom-mpm.c > > -- > 2.25.1 >
