The bindings defined strict clocks but several variants do not use them
in such order. Split the clocks and clock-names per variants to match
current DTS usage. In few cases this might not be complete match, due
to incomplete DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../devicetree/bindings/usb/qcom,dwc3.yaml | 222 ++++++++++++++++--
1 file changed, 200 insertions(+), 22 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 03f93f25cba4..5047ca31657c 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -54,26 +54,22 @@ properties:
maxItems: 1
clocks:
- description:
- A list of phandle and clock-specifier pairs for the clocks
- listed in clock-names.
- items:
- - description: System Config NOC clock.
- - description: Master/Core clock, has to be >= 125 MHz
- for SS operation and >= 60MHz for HS operation.
- - description: System bus AXI clock.
- - description: Mock utmi clock needed for ITP/SOF generation
- in host mode. Its frequency should be 19.2MHz.
- - description: Sleep clock, used for wakeup when
- USB3 core goes into low power mode (U3).
+ description: |
+ Several clocks are used, depending on the variant. Typical ones are::
+ - cfg_noc:: System Config NOC clock.
+ - core:: Master/Core clock, has to be >= 125 MHz for SS operation and >=
+ 60MHz for HS operation.
+ - iface:: System bus AXI clock.
+ - sleep:: Sleep clock, used for wakeup when USB3 core goes into low
+ power mode (U3).
+ - mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host
+ mode. Its frequency should be 19.2MHz.
+ minItems: 1
+ maxItems: 6
clock-names:
- items:
- - const: cfg_noc
- - const: core
- - const: iface
- - const: mock_utmi
- - const: sleep
+ minItems: 1
+ maxItems: 6
assigned-clocks:
items:
@@ -136,6 +132,185 @@ required:
- interrupts
- interrupt-names
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq4019-dwc3
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ items:
+ - const: core
+ - const: sleep
+ - const: mock_utmi
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq8064-dwc3
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Master/Core clock, has to be >= 125 MHz
+ for SS operation and >= 60MHz for HS operation.
+ clock-names:
+ items:
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8953-dwc3
+ - qcom,msm8996-dwc3
+ - qcom,msm8998-dwc3
+ - qcom,sc7180-dwc3
+ - qcom,sc7280-dwc3
+ - qcom,sdm845-dwc3
+ - qcom,sdx55-dwc3
+ - qcom,sm6350-dwc3
+ then:
+ properties:
+ clocks:
+ maxItems: 5
+ clock-names:
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq6018-dwc3
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 4
+ clock-names:
+ oneOf:
+ - items:
+ - const: core
+ - const: sleep
+ - const: mock_utmi
+ - items:
+ - const: cfg_noc
+ - const: core
+ - const: sleep
+ - const: mock_utmi
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq8074-dwc3
+ then:
+ properties:
+ clocks:
+ maxItems: 4
+ clock-names:
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: sleep
+ - const: mock_utmi
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8994-dwc3
+ - qcom,qcs404-dwc3
+ then:
+ properties:
+ clocks:
+ maxItems: 4
+ clock-names:
+ items:
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sdm660-dwc3
+ then:
+ properties:
+ clocks:
+ minItems: 6
+ clock-names:
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
+ - const: bus
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm6125-dwc3
+ - qcom,sm8150-dwc3
+ - qcom,sm8250-dwc3
+ - qcom,sm8450-dwc3
+ then:
+ properties:
+ clocks:
+ minItems: 6
+ clock-names:
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
+ - const: xo
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8350-dwc3
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ maxItems: 6
+ clock-names:
+ minItems: 5
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
+ - const: xo
+
+
additionalProperties: false
examples:
@@ -157,10 +332,13 @@ examples:
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
- clock-names = "cfg_noc", "core", "iface", "mock_utmi",
- "sleep";
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
--
2.32.0
