On STM32MP1x SOCs, RTC is able to output some signals on its own pins.
This series add the possibility to select two of these signals on
RTC pins :
- LSCO (Low Speed Clock Output) that allow to output LSE clock on a pin.
On STM32MP1x Discovery boards this feature is used to generate a clock
to Wifi/Bluetooth module.
- Alarm out that allow to send a pulse on a pin when alarm A of the RTC
expires.
Amelie Delaunay (2):
dt-bindings: rtc: stm32: add st,lsco optional property to select
output
rtc: stm32: add Low Speed Clock Output (LSCO) support
Gabriel Fernandez (2):
ARM: dts: stm32: add RTC LSCO support on stm32mp157c-dk2
ARM: dts: stm32: add RTC LSCO support on stm32mp135f-dk
Valentin Caron (2):
dt-bindings: rtc: stm32: add alarm A out property to select output
rtc: stm32: add alarm A out feature
.../devicetree/bindings/rtc/st,stm32-rtc.yaml | 37 +++
arch/arm/boot/dts/stm32mp13-pinctrl.dtsi | 6 +
arch/arm/boot/dts/stm32mp135f-dk.dts | 4 +
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 6 +
arch/arm/boot/dts/stm32mp157c-dk2.dts | 7 +
drivers/rtc/Kconfig | 1 +
drivers/rtc/rtc-stm32.c | 210 ++++++++++++++++++
include/dt-bindings/rtc/rtc-stm32.h | 14 ++
8 files changed, 285 insertions(+)
create mode 100644 include/dt-bindings/rtc/rtc-stm32.h
--
2.25.1
