Re: [PATCH v5 2/4] dt-bindings: document Rockchip thermal

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Sep 17, 2014 at 12:48:16PM -0700, Doug Anderson wrote:
> Caesar,
> 
> On Tue, Sep 16, 2014 at 8:59 PM, Caesar Wang <caesar.wang@xxxxxxxxxxxxxx> wrote:
> > This add the necessary binding documentation for the thermal
> > found on Rockchip SoCs
> >
> > Signed-off-by: zhaoyifeng <zyf@xxxxxxxxxxxxxx>
> > Signed-off-by: Caesar Wang <caesar.wang@xxxxxxxxxxxxxx>
> > ---
> >  .../bindings/thermal/rockchip-thermal.txt          | 41 ++++++++++++++++++++++
> >  1 file changed, 41 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> >
> > diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> > new file mode 100644
> > index 0000000..6fc8bc3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> > @@ -0,0 +1,41 @@
> > +* Temperature Sensor ADC (TSADC) on rockchip SoCs
> > +
> > +Required properties:
> > +- compatible: "rockchip,rk3288-tsadc"
> > +- reg: physical base address of the controller and length of memory mapped
> > +       region.
> > +- interrupts: The interrupt number to the cpu. The interrupt specifier format
> > +             depends on the interrupt controller.
> > +- clocks: Must contain an entry for each entry in clock-names.
> > +- clock-names: Shall be "tsadc" for the converter-clock, and "apb_pclk" for
> > +              the peripheral clock.
> > +- num-trips:  number of total trip points, this is required, set it 0 if none,
> > +             if greater than 0, the following properties must be defined;
> 
> nit: there is whitespace damage (space before tab) on the line before
> this one.  It's more obvious in the patch you uploaded to gerrit which
> highlights this in red:
> 
> https://chromium-review.googlesource.com/#/c/213967/5/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> 
> Did you run your patches through checkpatch before submitting?

FWIW vim users like me can put the following in their .vimrc file to
have whitespace damage visible right away:

:highlight RedundantSpaces ctermbg=red guibg=red
:match RedundantSpaces /\s\+$\| \+\ze\t/

Thanks.

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux