Qualcomm IPQ8074 has tsens v2.3.0 block, though unlike existing v2 IP it
only uses one IRQ, so tsens v2 compatible cannot be used as the fallback.
We also have to make sure that correct interrupts are set according to
compatibles, so populate interrupt information per compatibles.
Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
Changes in v3:
* Remove implied min/maxItem properties as pointed by Rob
Changes in v2:
* No need for a list in compatible check
* Specify minItems and maxItems for interrupt and interrupt-names
---
.../bindings/thermal/qcom-tsens.yaml | 76 ++++++++++++++++---
1 file changed, 65 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index b6406bcc683f..23f69eead67e 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -56,6 +56,10 @@ properties:
- qcom,sm8350-tsens
- const: qcom,tsens-v2
+ - description: v2 of TSENS with combined interrupt
+ enum:
+ - qcom,ipq8074-tsens
+
reg:
items:
- description: TM registers
@@ -63,15 +67,11 @@ properties:
interrupts:
minItems: 1
- items:
- - description: Combined interrupt if upper or lower threshold crossed
- - description: Interrupt if critical threshold crossed
+ maxItems: 2
interrupt-names:
minItems: 1
- items:
- - const: uplow
- - const: critical
+ maxItems: 2
nvmem-cells:
minItems: 1
@@ -124,22 +124,61 @@ allOf:
then:
properties:
interrupts:
- maxItems: 1
+ items:
+ - description: Combined interrupt if upper or lower threshold crossed
interrupt-names:
- maxItems: 1
+ items:
+ - const: uplow
- else:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8953-tsens
+ - qcom,msm8996-tsens
+ - qcom,msm8998-tsens
+ - qcom,sc7180-tsens
+ - qcom,sc7280-tsens
+ - qcom,sc8180x-tsens
+ - qcom,sdm630-tsens
+ - qcom,sdm845-tsens
+ - qcom,sm8150-tsens
+ - qcom,sm8250-tsens
+ - qcom,sm8350-tsens
+ - qcom,tsens-v2
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: Combined interrupt if upper or lower threshold crossed
+ - description: Interrupt if critical threshold crossed
+ interrupt-names:
+ items:
+ - const: uplow
+ - const: critical
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq8074-tsens
+ then:
properties:
interrupts:
- minItems: 2
+ items:
+ - description: Combined interrupt if upper, lower or critical thresholds crossed
interrupt-names:
- minItems: 2
+ items:
+ - const: combined
- if:
properties:
compatible:
contains:
enum:
+ - qcom,ipq8074-tsens
- qcom,tsens-v0_1
- qcom,tsens-v1
- qcom,tsens-v2
@@ -222,4 +261,19 @@ examples:
#qcom,sensors = <13>;
#thermal-sensor-cells = <1>;
};
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ // Example 4 (for any IPQ8074 based SoC-s):
+ tsens4: thermal-sensor@4a9000 {
+ compatible = "qcom,ipq8074-tsens";
+ reg = <0x4a9000 0x1000>,
+ <0x4a8000 0x1000>;
+
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "combined";
+
+ #qcom,sensors = <16>;
+ #thermal-sensor-cells = <1>;
+ };
...
--
2.35.1
