On Tue, May 03, 2022 at 10:13:08AM +0800, Li-hao Kuo wrote: > Add bindings for Sunplus thermal driver > > Signed-off-by: Li-hao Kuo <lhjeff911@xxxxxxxxx> > --- > Changes in v8: > - Modify yaml file. > modify the setting compatible > - Change yaml file name. > - Modify driver. > mosdify and simply the nvmem setting and remove valiable > > .../bindings/thermal/sunplus,thermal.yaml | 43 ++++++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 44 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/sunplus,thermal.yaml > > diff --git a/Documentation/devicetree/bindings/thermal/sunplus,thermal.yaml b/Documentation/devicetree/bindings/thermal/sunplus,thermal.yaml > new file mode 100644 > index 0000000..1ecf6f6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/sunplus,thermal.yaml > @@ -0,0 +1,43 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright (C) Sunplus Co., Ltd. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/thermal/sunplus,thermal.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Sunplus Thermal controller > + > +maintainers: > + - Li-hao Kuo <lhjeff911@xxxxxxxxx> > + > +properties: > + compatible: > + enum: > + - sunplus,thermal I don't think is is what was suggested. This must be SoC specific. > + > + reg: > + maxItems: 1 > + > + nvmem-cells: > + maxItems: 1 > + > + nvmem-cell-names: > + const: calib > + > +required: > + - compatible > + - reg > + - nvmem-cells > + - nvmem-cell-names > + > +additionalProperties: false > + > +examples: > + - | > + thermal@9c000280 { > + compatible = "sunplus,thermal"; > + reg = <0x9c000280 0xc>; > + nvmem-cells = <&calib>; > + nvmem-cell-names = "calib"; > + }; > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index 82143ff..ff49023 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -18900,6 +18900,7 @@ SUNPLUS THERMAL DRIVER > M: Li-hao Kuo <lhjeff911@xxxxxxxxx> > L: linux-pm@xxxxxxxxxxxxxxx > S: Maintained > +F: Documentation/devicetree/bindings/thermal/sunplus,thermal.yaml > F: drivers/thermal/sunplus_thermal.c > > SUNPLUS UART DRIVER > -- > 2.7.4 > >
