Re: [PATCH v2 1/8] clk: qcom: rcg2: Cache rate changes for parked RCGs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 03 May 08:04 CDT 2022, Robert Foss wrote:

> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> 
> As GDSCs are turned on and off some associated clocks are momentarily
> enabled for house keeping purposes. Failure to enable these clocks seems
> to have been silently ignored in the past, but starting in SM8350 this
> failure will prevent the GDSC to turn on.
> 
> At least on SM8350 this operation will enable the RCG per the
> configuration in CFG_REG. This means that the current model where the
> current configuration is written back to CF_REG immediately after
> parking the RCG doesn't work.
> 
> Instead, keep track of the currently requested rate of the clock and
> upon enabling the clock reapply the configuration per the saved rate.
> 
> Fixes: 7ef6f11887bd ("clk: qcom: Configure the RCGs to a safe source as needed")
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx>
> Tested-by: Steev Klimaszewski <steev@xxxxxxxx>
> ---

This patch has been iterated since and the latest incarnation can be
found on below link. A reference to that in the cover letter would be
sufficient.

https://lore.kernel.org/linux-arm-msm/20220426212136.1543984-1-bjorn.andersson@xxxxxxxxxx/

Thanks,
Bjorn

>  drivers/clk/qcom/clk-rcg.h  |  2 ++
>  drivers/clk/qcom/clk-rcg2.c | 32 +++++++++++++++++---------------
>  2 files changed, 19 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
> index 00cea508d49e..8b41244b8dbf 100644
> --- a/drivers/clk/qcom/clk-rcg.h
> +++ b/drivers/clk/qcom/clk-rcg.h
> @@ -140,6 +140,7 @@ extern const struct clk_ops clk_dyn_rcg_ops;
>   * @freq_tbl: frequency table
>   * @clkr: regmap clock handle
>   * @cfg_off: defines the cfg register offset from the CMD_RCGR + CFG_REG
> + * @current_rate: cached rate for parked RCGs
>   */
>  struct clk_rcg2 {
>  	u32			cmd_rcgr;
> @@ -150,6 +151,7 @@ struct clk_rcg2 {
>  	const struct freq_tbl	*freq_tbl;
>  	struct clk_regmap	clkr;
>  	u8			cfg_off;
> +	unsigned long		current_rate;
>  };
>  
>  #define to_clk_rcg2(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg2, clkr)
> diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
> index f675fd969c4d..81fd3a2db709 100644
> --- a/drivers/clk/qcom/clk-rcg2.c
> +++ b/drivers/clk/qcom/clk-rcg2.c
> @@ -167,6 +167,7 @@ clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
>  {
>  	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
>  	u32 cfg, hid_div, m = 0, n = 0, mode = 0, mask;
> +	unsigned long rate;
>  
>  	regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg);
>  
> @@ -186,7 +187,11 @@ clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
>  	hid_div = cfg >> CFG_SRC_DIV_SHIFT;
>  	hid_div &= mask;
>  
> -	return calc_rate(parent_rate, m, n, mode, hid_div);
> +	rate = calc_rate(parent_rate, m, n, mode, hid_div);
> +	if (!rcg->current_rate)
> +		rcg->current_rate = rate;
> +
> +	return rate;
>  }
>  
>  static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f,
> @@ -978,12 +983,14 @@ static int clk_rcg2_shared_set_rate(struct clk_hw *hw, unsigned long rate,
>  	if (!f)
>  		return -EINVAL;
>  
> +	rcg->current_rate = rate;
> +
>  	/*
> -	 * In case clock is disabled, update the CFG, M, N and D registers
> -	 * and don't hit the update bit of CMD register.
> +	 * In the case that the shared RCG is parked, current_rate will be
> +	 * applied as the clock is unparked again, so just return here.
>  	 */
>  	if (!__clk_is_enabled(hw->clk))
> -		return __clk_rcg2_configure(rcg, f);
> +		return 0;
>  
>  	return clk_rcg2_shared_force_enable_clear(hw, f);
>  }
> @@ -997,8 +1004,13 @@ static int clk_rcg2_shared_set_rate_and_parent(struct clk_hw *hw,
>  static int clk_rcg2_shared_enable(struct clk_hw *hw)
>  {
>  	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
> +	const struct freq_tbl *f = NULL;
>  	int ret;
>  
> +	f = qcom_find_freq(rcg->freq_tbl, rcg->current_rate);
> +	if (!f)
> +		return -EINVAL;
> +
>  	/*
>  	 * Set the update bit because required configuration has already
>  	 * been written in clk_rcg2_shared_set_rate()
> @@ -1007,7 +1019,7 @@ static int clk_rcg2_shared_enable(struct clk_hw *hw)
>  	if (ret)
>  		return ret;
>  
> -	ret = update_config(rcg);
> +	ret = clk_rcg2_configure(rcg, f);
>  	if (ret)
>  		return ret;
>  
> @@ -1017,13 +1029,6 @@ static int clk_rcg2_shared_enable(struct clk_hw *hw)
>  static void clk_rcg2_shared_disable(struct clk_hw *hw)
>  {
>  	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
> -	u32 cfg;
> -
> -	/*
> -	 * Store current configuration as switching to safe source would clear
> -	 * the SRC and DIV of CFG register
> -	 */
> -	regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg);
>  
>  	/*
>  	 * Park the RCG at a safe configuration - sourced off of safe source.
> @@ -1041,9 +1046,6 @@ static void clk_rcg2_shared_disable(struct clk_hw *hw)
>  	update_config(rcg);
>  
>  	clk_rcg2_clear_force_enable(hw);
> -
> -	/* Write back the stored configuration corresponding to current rate */
> -	regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, cfg);
>  }
>  
>  const struct clk_ops clk_rcg2_shared_ops = {
> -- 
> 2.34.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux