Currently the output PA[32:33] is contained by the flag IOVA_34. This is not right. the iova_34 has no relation with pa[32:33], the 32bits iova still could map to pa[32:33]. Move it out from the flag. No need fix tag since currently only mt8192 use the calulation and it always has this IOVA_34 flag. Prepare for the IOMMU that still use IOVA 32bits but its dram size may be over 4GB. Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> --- drivers/iommu/mtk_iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c index ca77e7f1ce5d..d9689e041336 100644 --- a/drivers/iommu/mtk_iommu.c +++ b/drivers/iommu/mtk_iommu.c @@ -283,11 +283,11 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT; if (MTK_IOMMU_HAS_FLAG(data->plat_data, IOVA_34_EN)) { va34_32 = FIELD_GET(F_MMU_INVAL_VA_34_32_MASK, fault_iova); - pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova); fault_iova = fault_iova & F_MMU_INVAL_VA_31_12_MASK; fault_iova |= (u64)va34_32 << 32; - fault_pa |= (u64)pa34_32 << 32; } + pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova); + fault_pa |= (u64)pa34_32 << 32; fault_port = F_MMU_INT_ID_PORT_ID(regval); if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) { -- 2.18.0