[PATCH 08/14] arm64: dts: qcom: msm8998-oneplus: Apply style fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add some newlines, reorder some properties, remove some indentation to make
it more coherent.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
 .../boot/dts/qcom/msm8998-oneplus-common.dtsi | 45 +++++++++++++++----
 1 file changed, 36 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index 5c4454da6bca..501771068938 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -11,9 +11,9 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include "msm8998.dtsi"
+#include "pm8005.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
-#include "pm8005.dtsi"
 
 / {
 	/* Required for bootloader to select correct board */
@@ -241,13 +241,11 @@ pm8005_s1: s1 {
 
 &pm8998_gpio {
 	vol_keys_default: vol-keys-default {
-		pinconf {
-			pins = "gpio5", "gpio6";
-			function = "normal";
-			bias-pull-up;
-			input-enable;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-		};
+		pins = "gpio5", "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 	};
 };
 
@@ -295,91 +293,113 @@ vreg_s3a_1p35: s3 {
 			regulator-min-microvolt = <1352000>;
 			regulator-max-microvolt = <1352000>;
 		};
+
 		vreg_s4a_1p8: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_s5a_2p04: s5 {
 			regulator-min-microvolt = <1904000>;
 			regulator-max-microvolt = <2040000>;
 		};
+
 		vreg_s7a_1p025: s7 {
 			regulator-min-microvolt = <900000>;
 			regulator-max-microvolt = <1028000>;
 		};
+
 		vreg_l1a_0p875: l1 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
 		};
+
 		vreg_l2a_1p2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 		};
+
 		vreg_l3a_1p0: l3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 		};
+
 		vreg_l5a_0p8: l5 {
 			regulator-min-microvolt = <800000>;
 			regulator-max-microvolt = <800000>;
 		};
+
 		vreg_l6a_1p8: l6 {
 			regulator-min-microvolt = <1808000>;
 			regulator-max-microvolt = <1808000>;
 		};
+
 		vreg_l7a_1p8: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		vreg_l8a_1p2: l8 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 		};
+
 		vreg_l9a_1p8: l9 {
 			regulator-min-microvolt = <1808000>;
 			regulator-max-microvolt = <2960000>;
 		};
+
 		vreg_l10a_1p8: l10 {
 			regulator-min-microvolt = <1808000>;
 			regulator-max-microvolt = <2960000>;
 		};
+
 		vreg_l11a_1p0: l11 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 		};
+
 		vreg_l12a_1p8: l12 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		vreg_l13a_2p95: l13 {
 			regulator-min-microvolt = <1808000>;
 			regulator-max-microvolt = <2960000>;
 		};
+
 		vreg_l14a_1p88: l14 {
 			regulator-min-microvolt = <1880000>;
 			regulator-max-microvolt = <1880000>;
 		};
+
 		vreg_l15a_1p8: l15 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		vreg_l16a_2p7: l16 {
 			regulator-min-microvolt = <2704000>;
 			regulator-max-microvolt = <2704000>;
 		};
+
 		vreg_l17a_1p3: l17 {
 			regulator-min-microvolt = <1304000>;
 			regulator-max-microvolt = <1304000>;
 		};
+
 		vreg_l18a_2p7: l18 {
 			regulator-min-microvolt = <2704000>;
 			regulator-max-microvolt = <2704000>;
 		};
+
 		vreg_l19a_3p0: l19 {
 			regulator-min-microvolt = <3008000>;
 			regulator-max-microvolt = <3008000>;
 		};
+
 		vreg_l20a_2p95: l20 {
 			regulator-min-microvolt = <2960000>;
 			regulator-max-microvolt = <2960000>;
@@ -388,34 +408,41 @@ vreg_l20a_2p95: l20 {
 		vreg_l21a_2p95: l21 {
 			regulator-min-microvolt = <2960000>;
 			regulator-max-microvolt = <2960000>;
-			regulator-allow-set-load;
 			regulator-system-load = <800000>;
+			regulator-allow-set-load;
 		};
+
 		vreg_l22a_2p85: l22 {
 			regulator-min-microvolt = <2864000>;
 			regulator-max-microvolt = <2864000>;
 		};
+
 		vreg_l23a_3p3: l23 {
 			regulator-min-microvolt = <3312000>;
 			regulator-max-microvolt = <3312000>;
 		};
+
 		vreg_l24a_3p075: l24 {
 			regulator-min-microvolt = <3088000>;
 			regulator-max-microvolt = <3088000>;
 		};
+
 		vreg_l25a_3p3: l25 {
 			regulator-min-microvolt = <3104000>;
 			regulator-max-microvolt = <3312000>;
 		};
+
 		vreg_l26a_1p2: l26 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l28_3p0: l28 {
 			regulator-min-microvolt = <3008000>;
 			regulator-max-microvolt = <3008000>;
 		};
+
 		vreg_lvs1a_1p8: lvs1 { };
 		vreg_lvs2a_1p8: lvs2 { };
 	};
-- 
2.35.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux