Update the pcie bindings to the correct dt bindings: pcie_phy: - use pcie0_refclk - add required clock-names pcie: - remove pcie_phy clock as it comes from phy driver Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx> --- v2: - update commit log - add required clock-names to pcie_phy node --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index edf0c7aaaef0..7848509b3e2b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -595,7 +595,8 @@ &pcie_phy { fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; fsl,clkreq-unsupported; - clocks = <&clk IMX8MM_CLK_DUMMY>; + clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; @@ -604,8 +605,8 @@ pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&clk IMX8MM_CLK_DUMMY>, <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; -- 2.17.1