On Fri, Sep 12, 2014 at 04:48:58PM +0800, Robin Gong wrote: > Add simple power off driver for i.mx6. > > Signed-off-by: Robin Gong <b38343@xxxxxxxxxxxxx> > --- > drivers/power/reset/Kconfig | 6 +++ > drivers/power/reset/Makefile | 1 + > drivers/power/reset/imx-snvs-poweroff.c | 69 +++++++++++++++++++++++++++++++++ > 3 files changed, 76 insertions(+) > create mode 100644 drivers/power/reset/imx-snvs-poweroff.c > > diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig > index ca41523..c48d9ba 100644 > --- a/drivers/power/reset/Kconfig > +++ b/drivers/power/reset/Kconfig > @@ -45,6 +45,12 @@ config POWER_RESET_HISI > help > Reboot support for Hisilicon boards. > > +config POWER_RESET_IMX > + bool "IMX6 power-off driver" > + depends on POWER_RESET && SOC_IMX6 > + help > + Power off support for i.mx6 boards. > + > config POWER_RESET_MSM > bool "Qualcomm MSM power-off driver" > depends on POWER_RESET && ARCH_QCOM > diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile > index a42e70e..2524daf 100644 > --- a/drivers/power/reset/Makefile > +++ b/drivers/power/reset/Makefile > @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o > obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o > obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o > obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o > +obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o > obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o > obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o > obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o > diff --git a/drivers/power/reset/imx-snvs-poweroff.c b/drivers/power/reset/imx-snvs-poweroff.c > new file mode 100644 > index 0000000..55603ba > --- /dev/null > +++ b/drivers/power/reset/imx-snvs-poweroff.c > @@ -0,0 +1,69 @@ > +/* Power off driver for i.mx6 > + * Copyright (c) 2014, FREESCALE CORPORATION. All rights reserved. > + * > + * based on msm-poweroff.c > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include <linux/delay.h> Is it really needed? > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/platform_device.h> > + > +#include <asm/system_misc.h> Ditto Shawn > + > +static void __iomem *snvs_base; > + > +static void do_imx_poweroff(void) > +{ > + u32 value = readl(snvs_base); > + > + /* set TOP and DP_EN bit */ > + writel(value | 0x60, snvs_base); > +} > + > +static int imx_poweroff_probe(struct platform_device *pdev) > +{ > + snvs_base = of_iomap(pdev->dev.of_node, 0); > + if (!snvs_base) { > + dev_err(&pdev->dev, "failed to get memory\n"); > + return -EIO; > + } > + > + pm_power_off = do_imx_poweroff; > + return 0; > +} > + > +static const struct of_device_id of_imx_poweroff_match[] = { > + { .compatible = "fsl,sec-v4.0-poweroff", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, of_imx_poweroff_match); > + > +static struct platform_driver imx_poweroff_driver = { > + .probe = imx_poweroff_probe, > + .driver = { > + .name = "imx-snvs-poweroff", > + .of_match_table = of_match_ptr(of_imx_poweroff_match), > + }, > +}; > + > +static int __init imx_poweroff_init(void) > +{ > + return platform_driver_register(&imx_poweroff_driver); > +} > +device_initcall(imx_poweroff_init); > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html