Re: [PATCH V4 12/15] dt-bindings: reset: mediatek: Add infra_ao reset bit for MT8192/MT8195

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2022-04-28 at 15:18 +0800, Krzysztof Kozlowski wrote:
> On 27/04/2022 05:09, Rex-BC Chen wrote:
> > - To support reset of infra_ao, add the bit definition of
> >   thermal/PCIe/SVS for MT8192.
> > - To support reset of infra_ao, add the bit definition of
> >   thermal/SVS for MT8195.
> > - Add the driver comment to separate the reset index for
> >   TOPRGU and INFRA.
> > 
> > Signed-off-by: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
> > ---
> >  include/dt-bindings/reset/mt8192-resets.h | 8 ++++++++
> >  include/dt-bindings/reset/mt8195-resets.h | 6 ++++++
> >  2 files changed, 14 insertions(+)
> > 
> > diff --git a/include/dt-bindings/reset/mt8192-resets.h
> > b/include/dt-bindings/reset/mt8192-resets.h
> > index be9a7ca245b9..ee0ca02a39bf 100644
> > --- a/include/dt-bindings/reset/mt8192-resets.h
> > +++ b/include/dt-bindings/reset/mt8192-resets.h
> > @@ -7,6 +7,7 @@
> >  #ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8192
> >  #define _DT_BINDINGS_RESET_CONTROLLER_MT8192
> >  
> > +/* TOPRGU resets */
> >  #define MT8192_TOPRGU_MM_SW_RST					
> > 1
> >  #define MT8192_TOPRGU_MFG_SW_RST				2
> >  #define MT8192_TOPRGU_VENC_SW_RST				3
> > @@ -27,4 +28,11 @@
> >  
> >  #define MT8192_TOPRGU_SW_RST_NUM				23
> >  
> > +/* INFRA resets */
> > +#define MT8192_INFRA_THERMAL_CTRL_RST			0
> > +#define MT8192_INFRA_PEXTP_PHY_RST				79
> > +#define MT8192_INFRA_PTP_RST					
> > 101
> > +#define MT8192_INFRA_RST4_PCIE_TOP				129
> > +#define MT8192_INFRA_THERMAL_CTRL_MCU_RST		140
> 
> This is still wrong. I gave you exactly what has to be used:
> 0
> 1
> 2
> ...
> 
> It's a decimal number incremented by one.
> 
> 
> > +
> >  #endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT8192 */
> > diff --git a/include/dt-bindings/reset/mt8195-resets.h
> > b/include/dt-bindings/reset/mt8195-resets.h
> > index a26bccc8b957..a3226f40779c 100644
> > --- a/include/dt-bindings/reset/mt8195-resets.h
> > +++ b/include/dt-bindings/reset/mt8195-resets.h
> > @@ -7,6 +7,7 @@
> >  #ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8195
> >  #define _DT_BINDINGS_RESET_CONTROLLER_MT8195
> >  
> > +/* TOPRGU resets */
> >  #define MT8195_TOPRGU_CONN_MCU_SW_RST          0
> >  #define MT8195_TOPRGU_INFRA_GRST_SW_RST        1
> >  #define MT8195_TOPRGU_APU_SW_RST               2
> > @@ -26,4 +27,9 @@
> >  
> >  #define MT8195_TOPRGU_SW_RST_NUM               16
> >  
> > +/* INFRA resets */
> > +#define MT8195_INFRA_THERMAL_AP_RST            0
> > +#define MT8195_INFRA_PTP_RST                   101
> > +#define MT8195_INFRA_THERMAL_MCU_RST           138
> 
> Same issue.
> 
> 
> Best regards,
> Krzysztof

Hello Krzysztof,

Thanks for your review.
As mentioned in prvious mail, I will add all reset bits in MT8192 and
MT8195.

BRs,
Rex




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux