Re: [PATCH 2/2] irqchip: Add RZ/G2L IA55 Interrupt Controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Prabhakar,

On Fri, Apr 22, 2022 at 12:12 AM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> Add a driver for the Renesas RZ/G2L Interrupt Controller.
>
> This supports external pins being used as interrupts. It supports
> one line for NMI, 8 external pins and 32 GPIO pins (out of 123)
> to be used as IRQ lines.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- /dev/null
> +++ b/drivers/irqchip/irq-renesas-rzg2l.c
> @@ -0,0 +1,447 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Renesas RZ/G2L IRQC Driver
> + *
> + * Copyright (C) 2022 Renesas Electronics Corporation.
> + *
> + * Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqdomain.h>
> +#include <linux/of_address.h>
> +#include <linux/reset.h>
> +#include <linux/spinlock.h>
> +
> +#define IRQC_IRQ_START                 1
> +#define IRQC_IRQ_COUNT                 8
> +#define IRQC_TINT_START                        9

= IRQC_IRQ_START + IRQC_IRQ_COUNT

> +#define IRQC_TINT_COUNT                        32
> +#define IRQC_NUM_IRQ                   41

= IRQC_TINT_START + IRQC_TINT_COUNT

Should these be in a DT binding header file?

Combining all types into a single linear number space makes it hard
to extend the range, when reusing for an SoC that supports more
interrupt sources.

> +static void rzg2l_irq_eoi(struct irq_data *d)
> +{
> +       struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
> +       unsigned int hw_irq = irqd_to_hwirq(d) - IRQC_IRQ_START;
> +       u16 bit = BIT(hw_irq);

I guess you can just use u32?

> +       u32 reg;
> +
> +       reg = readl_relaxed(priv->base + ISCR);
> +       if (reg & bit)
> +               writel_relaxed(GENMASK(IRQC_IRQ_COUNT - 1, 0) & ~bit,

As writes to the unused upper bits are ignored, you can drop the
masking with GENMASK(IRQC_IRQ_COUNT - 1, 0), and be prepared for more
interrupt sources.

> +                              priv->base + ISCR);
> +}
> +
> +static void rzg2l_tint_eoi(struct irq_data *d)
> +{
> +       struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
> +       unsigned int hw_irq = irqd_to_hwirq(d);

"irqd_to_hwirq(d) - IRQC_TINT_START", for symmetry with
rzg2l_irq_eoi()?

> +       u32 bit = BIT(hw_irq - IRQC_TINT_START);
> +       u32 reg;
> +
> +       reg = readl_relaxed(priv->base + TSCR);
> +       if (reg & bit)
> +               writel_relaxed(GENMASK(IRQC_TINT_COUNT - 1, 0) & ~bit,

Drop the masking with all-ones?

> +                              priv->base + TSCR);
> +}

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux