[PATCH v2 1/3] dt-bindings: i2c-gpio: Add property i2c-gpio,sda-output-only

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There are slave devices that understand I2C but have read-only
SDA and SCL. Examples are FD650 7-segment LED controller and
its derivatives. Typical board designs don't even have a
pull-up for both pins. Therefore don't enforce open-drain
if SDA and SCL both are unidirectional. This patch makes
i2c-gpio usable with such devices, based on new DT property
i2c-gpio,sda-output-only.

Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
v2:
- improve commit message
---
 Documentation/devicetree/bindings/i2c/i2c-gpio.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
index fd0402845..25cd1b260 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
@@ -33,6 +33,10 @@ properties:
       open drain.
     maxItems: 1
 
+  i2c-gpio,sda-output-only:
+    description: sda as output only
+    type: boolean
+
   i2c-gpio,scl-output-only:
     description: scl as output only
     type: boolean
-- 
2.35.3






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux