On 27/04/22 4:36 pm, Aswath Govindraju wrote:
> On 21/04/22 11:49, Vignesh Raghavendra wrote:
>> AM62 has x1 GPIO module and associated interrupt router in MCU Domain.
>> Add DT nodes for the same.
>>
>> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
>> ---
>> arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi | 28 +++++++++++++++++++++++++
>> 1 file changed, 28 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
>> index d103824c963f..45343381ad0b 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
>> @@ -53,4 +53,32 @@ mcu_spi1: spi@4b10000 {
>> power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
>> clocks = <&k3_clks 148 0>;
>> };
>> +
>> + mcu_gpio_intr: interrupt-controller@4210000 {
>> + compatible = "ti,sci-intr";
>> + reg = <0x00 0x04210000 0x00 0x200>;
>> + ti,intr-trigger-type = <1>;
>> + interrupt-controller;
>> + interrupt-parent = <&gic500>;
>> + #interrupt-cells = <1>;
>> + ti,sci = <&dmsc>;
>> + ti,sci-dev-id = <5>;
>> + ti,interrupt-ranges = <0 104 4>;
>> + };
>> +
>> + mcu_gpio0: gpio@4201000 {
>> + compatible = "ti,am64-gpio", "ti,keystone-gpio";
>> + reg = <0x0 0x4201000 0x0 0x100>;
>
> nitpick: reg = <0x00 0x04201000 0x00 0x100>;
Ah, yes.. Will fix locally before merging.
>
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-parent = <&mcu_gpio_intr>;
>> + interrupts = <30>, <31>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + ti,ngpio = <24>;
>> + ti,davinci-gpio-unbanked = <0>;
>> + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
>> + clocks = <&k3_clks 79 0>;
>> + clock-names = "gpio";
>> + };
>> };
>
>
> Aside from the above minor change,
>
> Reviewed-by: Aswath Govindraju <a-govindraju@xxxxxx>
>
Thanks!
Regards
Vignesh
