Add UFS node for R-Car S4-8 (r8a779f0).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index b0241aa29fc8..9639b50fb62b 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -40,6 +40,13 @@ extalr_clk: extalr {
clock-frequency = <0>;
};
+ ufs30_clk: ufs30-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
pmu_a55 {
compatible = "arm,cortex-a55-pmu";
interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
@@ -258,6 +265,18 @@ i2c5: i2c@e66e0000 {
status = "disabled";
};
+ ufs: ufs@e6860000 {
+ compatible = "renesas,r8a779f0-ufs";
+ reg = <0 0xe6860000 0 0x100>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>;
+ clock-names = "fck", "ref_clk";
+ freq-table-hz = <200000000 200000000>, <38400000 38400000>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 1514>;
+ status = "disabled";
+ };
+
scif3: serial@e6c50000 {
compatible = "renesas,scif-r8a779f0",
"renesas,rcar-gen4-scif", "renesas,scif";
--
2.25.1
