[PATCH 0/4] arm64: ti: k3-am62: Add DT nodes to enable display

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch series adds DT nodes for Display SubSystem and other
peripherals required to enable the display on the AM625-SK board. An
HDMI monitor can be connected to the board to view the image/video
outputs.

This series should be applied on top of Vignesh Raghavendra's patch
series that introduces the basic soc and board peripherals for AM62x.

Link for Vignesh's Patch series:
https://lore.kernel.org/linux-arm-kernel/20220427072954.8821-1-vigneshr@xxxxxx/


Aradhya Bhatia (4):
  arm64: dts: ti: k3-am62-main: Add node for Display SubSystem
  arm64: dts: ti: k3-am625-sk: Add DSS pinmux info
  arm64: dts: ti: k3-am625-sk: Update main-i2c1 frequency
  arm64: dts: ti: k3-am625-sk: Add DSS ports, HDMI tx & peripherals

 arch/arm64/boot/dts/ti/k3-am62-main.dtsi |  30 +++++++
 arch/arm64/boot/dts/ti/k3-am625-sk.dts   | 103 ++++++++++++++++++++++-
 2 files changed, 132 insertions(+), 1 deletion(-)

-- 
2.36.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux