Re: [PATCH 1/2] dt-bindings: usb: usb251xb: add documentation for reset-delay-us

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 26, 2022 at 12:33:47PM +0000, Daniels Umanovskis wrote:
> Next patch implements support for this property
> 
> Signed-off-by: Daniels Umanovskis <du@xxxxxxxxxx>

LGTM.

Reviewed-by: Richard Leitner <richard.leitner@xxxxxxxxxxx>

> ---
>  Documentation/devicetree/bindings/usb/usb251xb.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
> index 1a934eab175e..d95c8ae518e7 100644
> --- a/Documentation/devicetree/bindings/usb/usb251xb.txt
> +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
> @@ -12,6 +12,8 @@ Required properties :
>  
>  Optional properties :
>   - reset-gpios : Should specify the gpio for hub reset
> + - reset-delay-us: Specifies delay in microseconds after reset deassert
> +        on hub power-up. (32 bit, default is 500us)
>   - vdd-supply : Should specify the phandle to the regulator supplying vdd
>   - skip-config : Skip Hub configuration, but only send the USB-Attach command
>   - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
> -- 
> 2.30.2
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux