Original assert/deassert bit is BIT(0), but it's more resonable to modify
them to BIT(id % 32) which is based on id.
This patch will not influence any previous driver because the reset is
only used for thermal. The id (MT8183_INFRACFG_AO_THERM_SW_RST) is 0.
Fixes: 64ebb57a3df6 ("clk: reset: Modify reset-controller driver")
Signed-off-by: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
Reviewed-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
drivers/clk/mediatek/reset.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/mediatek/reset.c b/drivers/clk/mediatek/reset.c
index 9f3cb22aea1b..5191becb45dd 100644
--- a/drivers/clk/mediatek/reset.c
+++ b/drivers/clk/mediatek/reset.c
@@ -18,7 +18,7 @@ static int mtk_reset_assert_set_clr(struct reset_controller_dev *rcdev,
struct mtk_reset *data = container_of(rcdev, struct mtk_reset, rcdev);
unsigned int reg = data->regofs + ((id / 32) << 4);
- return regmap_write(data->regmap, reg, 1);
+ return regmap_write(data->regmap, reg, BIT(id % 32));
}
static int mtk_reset_deassert_set_clr(struct reset_controller_dev *rcdev,
@@ -27,7 +27,7 @@ static int mtk_reset_deassert_set_clr(struct reset_controller_dev *rcdev,
struct mtk_reset *data = container_of(rcdev, struct mtk_reset, rcdev);
unsigned int reg = data->regofs + ((id / 32) << 4) + 0x4;
- return regmap_write(data->regmap, reg, 1);
+ return regmap_write(data->regmap, reg, BIT(id % 32));
}
static int mtk_reset_assert(struct reset_controller_dev *rcdev,
--
2.18.0
