Re: [PATCH v21 0/3] usb: misc: Add onboard_usb_hub driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 21, 2022 at 11:13:08AM -0700, Matthias Kaehlcke wrote:
> Hi,
> 
> On Thu, Apr 07, 2022 at 12:41:22PM -0700, Doug Anderson wrote:
> > Hi,
> > 
> > On Thu, Feb 17, 2022 at 10:43 AM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
> > >
> > > This series adds:
> > > - the onboard_usb_hub_driver
> > > - glue in the generic HCD code to create and destroy the
> > >   onboard_usb_hub platform devices if needed
> > > - device tree changes that add RTS5411 entries for the QCA SC7180
> > >   based boards trogdor and lazor
> > > - a couple of stubs for platform device functions to avoid
> > >   unresolved symbols with certain kernel configs
> > >
> > > The main issue the driver addresses is that a USB hub needs to be
> > > powered before it can be discovered. For discrete onboard hubs (an
> > > example for such a hub is the Realtek RTS5411) this is often solved
> > > by supplying the hub with an 'always-on' regulator, which is kind
> > > of a hack. Some onboard hubs may require further initialization
> > > steps, like changing the state of a GPIO or enabling a clock, which
> > > requires even more hacks. This driver creates a platform device
> > > representing the hub which performs the necessary initialization.
> > > Currently it only supports switching on a single regulator, support
> > > for multiple regulators or other actions can be added as needed.
> > > Different initialization sequences can be supported based on the
> > > compatible string.
> > >
> > > Besides performing the initialization the driver can be configured
> > > to power the hub off during system suspend. This can help to extend
> > > battery life on battery powered devices which have no requirements
> > > to keep the hub powered during suspend. The driver can also be
> > > configured to leave the hub powered when a wakeup capable USB device
> > > is connected when suspending, and power it off otherwise.
> > >
> > > Changes in v21:
> > > - dropped patch 'driver core: Export device_is_bound()'
> > > - refactored _find_onboard_hub()
> > > - removed 'onboard_hub_dev' symlinks from USB devices
> > > - dropped patch 'arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub'
> > >   (will be sent separately)
> > > - rebased series on v5.17-rc4
> > >
> > > Changes in v20:
> > > - addressed review comments from Stephen
> > > - changed DT node names for hubs
> > >
> > > Changes in v19:
> > > - added VID:PID pairs and compatible strings for RTS5414 hub
> > > - updated comments with RTS5411 USB versions to reflect those
> > >   reported/supported by the hub
> > > - rebased series on v5.16
> > >
> > > Changes in v18:
> > > - introduced hidden Kconfig option to align module vs. builtin
> > >   choice with CONFIG_USB (thanks Doug!)
> > > - added patch 'driver core: Export device_is_bound()'
> > > - also adjust device tree of pompom rev1
> > > - dropped the following patches, which aren't needed anymore by this
> > >   series (though they might still be useful on their own):
> > >   - usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on'
> > >   - arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM
> > >   - ARM: configs: Explicitly enable USB_XHCI_PLATFORM where needed
> > >
> > > Changes in v17:
> > > - rebased on top of v5.16-rc1
> > > - moved creation of onboard_hub platform devices from xhci_platform
> > >   to the generic HCD code
> > > - addressed review comments for the onboard_hub driver
> > > - moved Kconfig/defconfig changes to the end of the series. The
> > >   onboard_hub driver doesn't depend on XHCI_PLATFORM anymore,
> > >   hence these changes aren't really required for the driver, but
> > >   they still seem to be a worthwhile improvement
> > >
> > > Changes in v16:
> > > - added patch 'ARM: configs: Explicitly enable USB_XHCI_PLATFORM
> > >   where needed' to keep arm32 defconfigs effectively unchanged
> > >
> > > Changes in v15:
> > > - adjusted dependencies of USB_DWC3_CORE to make sure it can only
> > >   be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET
> > >   or USB_DWC3_DUAL_ROLE is selectable
> > >
> > > Changes in v14:
> > > - rebased on top of v5.14-rc1
> > > - dropped DT binding patch which landed in v5.13
> > >
> > > Changes in v13:
> > > - added patch "usb: Specify dependency on USB_XHCI_PLATFORM with
> > >   'depends on'" to the series to avoid Kconfig conflicts
> > > - added patch "arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM"
> > >   to the series to keep effective defconfig unchanged
> > >
> > > Changes in v12:
> > > - onboard_hub driver: use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE)
> > >   in onboard_hub.h to also check for the driver built as module
> > > - onboard_hub_driver: include onboard_hub.h again to make sure there
> > >   are prototype declarations for the public functions
> > >
> > > Changes in v11:
> > > - support multiple onboard hubs connected to the same parent
> > > - don't include ‘onboard_hub.h’ from the onboard hub driver
> > >
> > > Changes in v10:
> > > - always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m
> > > - keep 'regulator-boot-on' property for pp3300_hub
> > >
> > > Changes in v9:
> > > - added dependency on ONBOARD_USB_HUB (or !ONBOARD_USB_HUB) to
> > >   USB_PLATFORM_XHCI
> > >
> > > Changes in v7:
> > > - updated DT binding
> > > - series rebased on qcom/arm64-for-5.13
> > >
> > > Changes in v6:
> > > - updated summary
> > >
> > > Changes in v5:
> > > - cover letter added
> > >
> > > Matthias Kaehlcke (3):
> > >   of/platform: Add stubs for of_platform_device_create/destroy()
> > >   usb: misc: Add onboard_usb_hub driver
> > >   usb: core: hcd: Create platform devices for onboard hubs in probe()
> > >
> > >  .../sysfs-bus-platform-onboard-usb-hub        |   8 +
> > >  MAINTAINERS                                   |   7 +
> > >  drivers/usb/core/hcd.c                        |   6 +
> > >  drivers/usb/misc/Kconfig                      |  23 +
> > >  drivers/usb/misc/Makefile                     |   1 +
> > >  drivers/usb/misc/onboard_usb_hub.c            | 510 ++++++++++++++++++
> > >  include/linux/of_platform.h                   |  22 +-
> > >  include/linux/usb/hcd.h                       |   1 +
> > >  include/linux/usb/onboard_hub.h               |  18 +
> > >  9 files changed, 592 insertions(+), 4 deletions(-)
> > >  create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
> > >  create mode 100644 drivers/usb/misc/onboard_usb_hub.c
> > >  create mode 100644 include/linux/usb/onboard_hub.h
> > 
> > With v5.18-rc1 out the door, I wonder if it's a good time to look at
> > this series again. Are there any hidden blockers that it's waiting
> > for?
> 
> Greg, please let me know if any further changes are needed or if this
> series can be landed.

After 21 different versions, there's nothing left for me to object to,
so I'll go queue it up.  Thanks for sticking with it.

greg k-h



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux