Re: [PATCH v1 2/2] drm/aspeed: Add 1024x768 mode for AST2600

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 4 Mar 2022 at 06:32, Tommy Haung <tommy_huang@xxxxxxxxxxxxxx> wrote:
>
> Update the aspeed_gfx_set_clk with display width.
> At AST2600, the display clock could be coming from
> HPLL clock / 16 = 75MHz. It would fit 1024x768@70Hz.
> Another chip will still keep 800x600.
>
> Signed-off-by: Tommy Haung <tommy_huang@xxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/aspeed/aspeed_gfx.h      | 12 ++++++----
>  drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c | 29 ++++++++++++++++++++----
>  drivers/gpu/drm/aspeed/aspeed_gfx_drv.c  | 16 +++++++++++--
>  drivers/gpu/drm/aspeed/aspeed_gfx_out.c  | 14 +++++++++++-
>  4 files changed, 60 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> index eb4c267cde5e..c7aefee0657a 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> @@ -109,11 +109,15 @@ int aspeed_gfx_create_output(struct drm_device *drm);
>  #define CRT_THROD_HIGH(x)              ((x) << 8)
>
>  /* SCU control */
> -#define SCU_G6_CLK_COURCE              0x300
> +#define G6_CLK_SOURCE                  0x300
> +#define G6_CLK_SOURCE_MASK             (BIT(8) | BIT(9) | BIT(10))
> +#define G6_CLK_SOURCE_HPLL             (BIT(8) | BIT(9) | BIT(10))
> +#define G6_CLK_SOURCE_USB              BIT(9)
> +#define G6_CLK_SEL3                    0x308
> +#define G6_CLK_DIV_MASK                        0x3F000

This register is defined in the data sheet as:

17:12 SOC Display clock selection when source is from DisplayPort PHY

That doesn't match with what the code is doing. Can you clarify the
register definition?

> +#define G6_CLK_DIV_16                  (BIT(16)|BIT(15)|BIT(13)|BIT(12))
> +#define G6_USB_40_CLK                  BIT(9)
>
>  /* GFX FLAGS */
>  #define CLK_MASK                       BIT(0)
>  #define CLK_G6                         BIT(0)
> -
> -#define G6_CLK_MASK                    (BIT(8) | BIT(9) | BIT(10))
> -#define G6_USB_40_CLK                  BIT(9)
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> index a24fab22eac4..5829be9c7c67 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> @@ -23,6 +23,28 @@ drm_pipe_to_aspeed_gfx(struct drm_simple_display_pipe *pipe)
>         return container_of(pipe, struct aspeed_gfx, pipe);
>  }
>
> +static void aspeed_gfx_set_clock_source(struct aspeed_gfx *priv, int mode_width)
> +{
> +       regmap_update_bits(priv->scu, G6_CLK_SOURCE, G6_CLK_SOURCE_MASK, 0x0);
> +       regmap_update_bits(priv->scu, G6_CLK_SEL3, G6_CLK_DIV_MASK, 0x0);
> +
> +       switch (mode_width) {
> +       case 1024:
> +               /* hpll div 16 = 75Mhz */
> +               regmap_update_bits(priv->scu, G6_CLK_SOURCE,
> +               G6_CLK_SOURCE_MASK, G6_CLK_SOURCE_HPLL);
> +               regmap_update_bits(priv->scu, G6_CLK_SEL3,
> +               G6_CLK_DIV_MASK, G6_CLK_DIV_16);
> +               break;
> +       case 800:
> +       default:
> +               /* usb 40Mhz */
> +               regmap_update_bits(priv->scu, G6_CLK_SOURCE,
> +               G6_CLK_SOURCE_MASK, G6_CLK_SOURCE_USB);
> +               break;
> +       }
> +}
> +
>  static int aspeed_gfx_set_pixel_fmt(struct aspeed_gfx *priv, u32 *bpp)
>  {
>         struct drm_crtc *crtc = &priv->pipe.crtc;
> @@ -77,12 +99,11 @@ static void aspeed_gfx_disable_controller(struct aspeed_gfx *priv)
>         regmap_update_bits(priv->scu, priv->dac_reg, BIT(16), 0);
>  }
>
> -static void aspeed_gfx_set_clk(struct aspeed_gfx *priv)
> +static void aspeed_gfx_set_clk(struct aspeed_gfx *priv, int mode_width)
>  {
>         switch (priv->flags & CLK_MASK) {
>         case CLK_G6:
> -               regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, 0x0);
> -               regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, G6_USB_40_CLK);
> +               aspeed_gfx_set_clock_source(priv, mode_width);
>                 break;
>         default:
>                 break;
> @@ -99,7 +120,7 @@ static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
>         if (err)
>                 return;
>
> -       aspeed_gfx_set_clk(priv);
> +       aspeed_gfx_set_clk(priv, m->hdisplay);
>
>  #if 0
>         /* TODO: we have only been able to test with the 40MHz USB clock. The
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> index af56ffdccc65..e1a814aebc2d 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> @@ -110,6 +110,7 @@ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
>
>  static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
>  {
> +       struct aspeed_gfx *priv = to_aspeed_gfx(drm);
>         int ret;
>
>         ret = drmm_mode_config_init(drm);
> @@ -118,8 +119,18 @@ static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
>
>         drm->mode_config.min_width = 0;
>         drm->mode_config.min_height = 0;
> -       drm->mode_config.max_width = 800;
> -       drm->mode_config.max_height = 600;
> +
> +       switch (priv->flags & CLK_MASK) {
> +       case CLK_G6:
> +               drm->mode_config.max_width = 1024;
> +               drm->mode_config.max_height = 768;
> +               break;
> +       default:
> +               drm->mode_config.max_width = 800;
> +               drm->mode_config.max_height = 600;
> +               break;
> +       }
> +
>         drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
>
>         return ret;
> @@ -167,6 +178,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
>         priv->vga_scratch_reg = config->vga_scratch_reg;
>         priv->throd_val = config->throd_val;
>         priv->scan_line_max = config->scan_line_max;
> +       priv->flags = config->gfx_flags;
>
>         priv->scu = syscon_regmap_lookup_by_phandle(np, "syscon");
>         if (IS_ERR(priv->scu)) {
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
> index 6759cb88415a..5d5e04f15c59 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
> @@ -10,7 +10,19 @@
>
>  static int aspeed_gfx_get_modes(struct drm_connector *connector)
>  {
> -       return drm_add_modes_noedid(connector, 800, 600);
> +       struct aspeed_gfx *priv = container_of(connector, struct aspeed_gfx, connector);
> +       int mode_count = 0;
> +
> +       switch (priv->flags & CLK_MASK) {
> +       case CLK_G6:
> +               mode_count = drm_add_modes_noedid(connector, 1024, 768);
> +               break;
> +       default:
> +               mode_count = drm_add_modes_noedid(connector, 800, 600);
> +               break;
> +       }
> +
> +       return mode_count;
>  }
>
>  static const struct
> --
> 2.17.1
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux