On Mon, Apr 25, 2022 at 02:16:02PM -0500, Daniel Kaehn wrote: > Adds dt-binding for snd-serial-generic serial MIDI driver Bindings are for h/w and there's no such thing as generic h/w. There are some exceptions but you'll have to justify why this is special. > Signed-off-by: Daniel Kaehn <kaehndan@xxxxxxxxx> > --- > .../devicetree/bindings/sound/serialmidi.yaml | 41 +++++++++++++++++++ > 1 file changed, 41 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/serialmidi.yaml > > diff --git a/Documentation/devicetree/bindings/sound/serialmidi.yaml b/Documentation/devicetree/bindings/sound/serialmidi.yaml > new file mode 100644 > index 000000000000..38ef49a0c2f9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/serialmidi.yaml > @@ -0,0 +1,41 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > + > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/serialmidi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Generic Serial MIDI Device > + > +maintainers: > + - Daniel Kaehn <kaehndan@xxxxxxxxx> > + > +description: | Don't need '|' unless there is formatting to preserve. > + Generic MIDI interface using a serial device. Can only be set to use standard speeds > + corresponding to supported baud rates of the underlying serial device. If standard MIDI > + speed of 31.25 kBaud is needed, configure the clocks of the underlying serial device > + so that a requested speed of 38.4 kBaud resuts in the standard MIDI baud rate. > + > +properties: > + compatible: > + const: serialmidi > + > + speed: Not a standard property and we already have 2 of them concerning baud rate. > + maxItems: 1 > + description: | > + Speed to set the serial port to when the MIDI device is opened. > + If not specified, the underlying serial device is allowed to use its configured default speed. > + > +required: > + - compatible > + > +additionalProperties: false > + > +examples: > + - | > + serial { > + midi { > + compatible = "serialmidi"; > + speed = <38400>; > + }; > + }; > -- > 2.33.0 > >