Convert the fsl,ls-extirq binding to the new YAML format.
In contrast to the original binding documentation, there are three
compatibles which are used in their corresponding device trees which
have a specific compatible and the (already documented) fallback
compatible:
- "fsl,ls1046a-extirq", "fsl,ls1043a-extirq"
- "fsl,ls2080a-extirq", "fsl,ls1088a-extirq"
- "fsl,lx2160a-extirq", "fsl,ls1088a-extirq"
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
changes since v1:
- new patch, because it's reference in patch 2/2
.../interrupt-controller/fsl,ls-extirq.txt | 53 -----------
.../interrupt-controller/fsl,ls-extirq.yaml | 88 +++++++++++++++++++
2 files changed, 88 insertions(+), 53 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
deleted file mode 100644
index 4d47df1a5c91..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale Layerscape external IRQs
-
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A
-LS1088A, LS208xA, LX216xA) support inverting
-the polarity of certain external interrupt lines.
-
-The device node must be a child of the node representing the
-Supplemental Configuration Unit (SCFG).
-
-Required properties:
-- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
- "fsl,ls1043a-extirq": for LS1043A, LS1046A.
- "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA.
-- #interrupt-cells: Must be 2. The first element is the index of the
- external interrupt line. The second element is the trigger type.
-- #address-cells: Must be 0.
-- interrupt-controller: Identifies the node as an interrupt controller
-- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
- the SCFG or the External Interrupt Control Register (IRQCR) in
- the ISC.
-- interrupt-map: Specifies the mapping from external interrupts to GIC
- interrupts.
-- interrupt-map-mask: Must be <0xffffffff 0>.
-
-Example:
- scfg: scfg@1570000 {
- compatible = "fsl,ls1021a-scfg", "syscon";
- reg = <0x0 0x1570000 0x0 0x10000>;
- big-endian;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x1570000 0x10000>;
-
- extirq: interrupt-controller@1ac {
- compatible = "fsl,ls1021a-extirq";
- #interrupt-cells = <2>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x1ac 4>;
- interrupt-map =
- <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-map-mask = <0xffffffff 0x0>;
- };
- };
-
-
- interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
new file mode 100644
index 000000000000..39d120ad7549
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-extirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape External Interrupt Controller
+
+maintainers:
+ - Shawn Guo <shawnguo@xxxxxxxxxx>
+ - Li Yang <leoyang.li@xxxxxxx>
+
+description: |
+ Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA,
+ LX216xA) support inverting the polarity of certain external interrupt
+ lines.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,ls1021a-extirq
+ - fsl,ls1043a-extirq
+ - fsl,ls1088a-extirq
+ - items:
+ - enum:
+ - fsl,ls1046a-extirq
+ - const: fsl,ls1043a-extirq
+ - items:
+ - enum:
+ - fsl,ls2080a-extirq
+ - fsl,lx2160a-extirq
+ - const: fsl,ls1088a-extirq
+
+ '#interrupt-cells':
+ const: 2
+
+ '#address-cells':
+ const: 0
+
+ interrupt-controller: true
+
+ reg:
+ maxItems: 1
+ description:
+ Specifies the Interrupt Polarity Control Register (INTPCR) in the
+ SCFG or the External Interrupt Control Register (IRQCR) in the ISC.
+
+ interrupt-map:
+ description: Specifies the mapping from external interrupts to GIC interrupts.
+
+ interrupt-map-mask:
+ items:
+ - const: 0xffffffff
+ - const: 0
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - '#address-cells'
+ - interrupt-controller
+ - reg
+ - interrupt-map
+ - interrupt-map-mask
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ interrupt-controller@1ac {
+ compatible = "fsl,ls1021a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1ac 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
--
2.30.2
