On pon, 2014-09-15 at 16:36 +0200, Javier Martinez Canillas wrote:
> Hello Krzysztof,
>
> On Fri, Sep 12, 2014 at 2:03 PM, Krzysztof Kozlowski
> <k.kozlowski@xxxxxxxxxxx> wrote:
> > + i2c_max77693: i2c-gpio-1 {
> > + compatible = "i2c-gpio";
> > + gpios = <&gpm2 0 0>, <&gpm2 1 0 >;
>
> Can you please include <dt-bindings/gpio/gpio.h> and use
> GPIO_ACTIVE_HIGH instead of 0 here for the type/level flags?
Sure!
>
> > + i2c-gpio,delay-us = <2>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "okay";
> > +
> > + max77693@66 {
> > + compatible = "maxim,max77693";
> > + interrupt-parent = <&gpx1>;
> > + interrupts = <5 2>;
> > + reg = <0x66>;
> > +
> > + regulators {
> > + esafeout1_reg: esafeout@1 {
> > + regulator-compatible = "ESAFEOUT1";
>
> According to Documentation/devicetree/bindings/regulator/regulator.txt,
> the "regulator-compatible" DT property has been deprecated in favor of
> just using the regulator node's name.
OK
>
> > + regulator-name = "ESAFEOUT1";
> > + };
> > + esafeout2_reg: esafeout@2 {
> > + regulator-compatible = "ESAFEOUT2";
> > + regulator-name = "ESAFEOUT2";
> > + };
> > + charger_reg: charger@0 {
> > + regulator-compatible = "CHARGER";
> > + regulator-name = "CHARGER";
> > + regulator-min-microamp = <60000>;
> > + regulator-max-microamp = <2580000>;
> > + };
> > + };
> > + };
> > + };
> > +
> > mmc@12550000 {
> > num-slots = <1>;
> > supports-highspeed;
> >
>
> Once those two issues are addressed, feel free to add my
>
> Reviewed-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
Thank you for feedback!
Best regards,
Krzysztof
>
> Best regards,
> Javier
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
