Add the device node for the r9a06g032 internal PCI bridge device. Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx> --- arch/arm/boot/dts/r9a06g032.dtsi | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index 20286433d3c6..33581f0c55c4 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -212,6 +212,35 @@ gic: interrupt-controller@44101000 { interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; + + pci_usb: pci@40030000 { + compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1"; + device_type = "pci"; + clocks = <&sysctrl R9A06G032_HCLK_USBH>, + <&sysctrl R9A06G032_HCLK_USBPM>, + <&sysctrl R9A06G032_CLK_PCI_USB>; + clock-names = "hclk_usbh", "hclk_usbpm", "clk_pci_usb"; + power-domains = <&sysctrl>; + reg = <0x40030000 0xc00>, + <0x40020000 0x1100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>; + /* Should map all possible DDR as inbound ranges, but + * the IP only supports a 256MB, 512MB, or 1GB window. + * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit) + */ + dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + }; }; timer { -- 2.35.1