Hi all,
This series introduce support for the Ethernet controller on Berlin SoCs,
using the existing pxa168 Ethernet driver. In order to do this, DT
support is added to the driver alongside some other modifications and
fixes.
This has been tested on a Berlin BG2Q DMP board.
Changes since v2:
- reworked how the MAC address is configured
- made the clock anonymous
Changes since v1:
- removed custom Berlin Ethernet driver
- used the pxa168 Ethernet driver instead
- made modifications to the pxa168 driver (DT support, fixes)
Antoine Tenart (9):
net: pxa168_eth: clean up
net: pxa168_eth: add device tree support
Documentation: bindings: net: add the Marvell PXA168 Ethernet
controller
net: pxa168_eth: fix Ethernet flow control status
net: pxa168_eth: get and set the mac address on the Ethernet
controller
net: pxa168_eth: rework the MAC address setup
net: pxa168_eth: allow Berlin SoCs to use the pxa168_eth driver
ARM: dts: berlin: add the Ethernet node
ARM: dts: berlin: enable the Ethernet port on the BG2Q DMP
.../devicetree/bindings/net/marvell-pxa168.txt | 21 ++
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 4 +
arch/arm/boot/dts/berlin2q.dtsi | 10 +
drivers/net/ethernet/marvell/Kconfig | 2 +-
drivers/net/ethernet/marvell/pxa168_eth.c | 216 +++++++++++++--------
5 files changed, 174 insertions(+), 79 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/marvell-pxa168.txt
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
