[PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When processing I2C_SLAVE_WRITE_REQUESTED event, if slave returns
-EBUSY, i2c controller should issue RxCmdLast command to assert NAK
on the bus.

Signed-off-by: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
---
v7:
  + None

v6:
  + New introduced in v6                      [Quan]

 drivers/i2c/busses/i2c-aspeed.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 771e53d3d197..ebc2b92656c8 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -244,6 +244,7 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 	u32 command, irq_handled = 0;
 	struct i2c_client *slave = bus->slave;
 	u8 value;
+	int ret;
 
 	if (!slave)
 		return 0;
@@ -311,7 +312,9 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 		break;
 	case ASPEED_I2C_SLAVE_WRITE_REQUESTED:
 		bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
-		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+		ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+		if (ret == -EBUSY)
+			writel(ASPEED_I2CD_M_S_RX_CMD_LAST, bus->base + ASPEED_I2C_CMD_REG);
 		break;
 	case ASPEED_I2C_SLAVE_WRITE_RECEIVED:
 		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
-- 
2.35.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux