Set the relevant properties on the smbb charger to allow the device to
charge properly.
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
index 8f07d8e363aa..34266126d5a2 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
@@ -397,6 +397,16 @@ &sdhc_2 {
pinctrl-1 = <&sdc2_off>;
};
+&smbb {
+ usb-charge-current-limit = <1500000>;
+ qcom,fast-charge-safe-current = <1500000>;
+ qcom,fast-charge-current-limit = <1500000>;
+ qcom,fast-charge-safe-voltage = <4380000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,auto-recharge-threshold-voltage = <4240000>;
+ qcom,minimum-input-voltage = <4450000>;
+};
+
&tlmm {
panel_pin: panel {
te {
--
2.36.0
