From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
The Rockchip RK3568 EVB1 features one USB 3.0 device-only
(USB 2.0 OTG) port and one USB 3.0 host-only port.
Activate the USB 3.0 controller nodes and phy nodes in the
device tree.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
---
.../boot/dts/rockchip/rk3568-evb1-v10.dts | 46 +++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index a794a0ea5c70..622be8be9813 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -103,6 +103,18 @@ vcc5v0_usb_host: vcc5v0-usb-host {
vin-supply = <&vcc5v0_usb>;
};
+ vcc5v0_usb_otg: vcc5v0-usb-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
+ regulator-name = "vcc5v0_usb_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
vcc3v3_lcd0_n: vcc3v3-lcd0-n {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_lcd0_n";
@@ -136,6 +148,14 @@ regulator-state-mem {
};
};
+&combphy0 {
+ status = "okay";
+};
+
+&combphy1 {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
@@ -507,6 +527,9 @@ usb {
vcc5v0_usb_host_en: vcc5v0_usb_host_en {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
};
@@ -568,6 +591,11 @@ &usb_host0_ohci {
status = "okay";
};
+&usb_host0_xhci {
+ extcon = <&usb2phy0>;
+ status = "okay";
+};
+
&usb_host1_ehci {
status = "okay";
};
@@ -576,6 +604,24 @@ &usb_host1_ohci {
status = "okay";
};
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ vbus-supply = <&vcc5v0_usb_otg>;
+ status = "okay";
+};
+
&usb2phy1 {
status = "okay";
};
--
2.25.1
